Zhangjiagang Jinyate Machinery Co., Ltd |
|
Specifications:
1. glass bottle filling machine
2. Washing filling capping 3-in-1 unit
3. Normal pressure
Products Introduction:
This CGF Wash-fillingcapping 3in1unit:Beverage Machinery is used to
produce polyester bottled mineral water, purified water, alcoholic
beverage machinery and other non-gas beverage machinery. The CGF
Wash-filling-capping 3-in-1unit:Beverage Machinery can finish all
the process such as press bottle, filling and sealing, it can
reduce the materials and Outsiders touch time, improve the sanitary
conditions, production capacity and economic efficiency.
Characteristics:
1. Using the wind sent access and move wheel in the bottle directly
connected technology; canceled screw and conveyor chains, this
enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology,
bottle-shaped transform not need to adjust the equipment level,
only change related the curved plate, wheel and nylon parts is
enough.
3. The specially designed stainless steel bottle washing machine
clip is solid and durable, no touch with the screw location of
bottle mouth to avoid secondary pollution.
4. High-speed large gravity flow valve filling valve, filling fast,
filling accurate and no liquid lose.
5. Spiraling decline when output bottle, transform bottle shape no
need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key
electrical components from famous company such as Japan's
Mitsubishi, France Schneider, OMRON.
You can click the below picture to see the video
https://youtu.be/w5AvcLVx32A
Technique parameter
Model | CGF8-8-3 | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 |
Productivity | 2000BPH | 4000BPH | 6000BPH | 10000BPH |
Rinsing Head | 8 | 16 | 18 | 24 |
Filling Head | 8 | 12 | 18 | 24 |
Capping Head | 3 | 6 | 6 | 8 |
Bottle Volume | 350ml~2000ml±10ml | |||
Bottle Diameter | φ50-92mm | |||
Bottle Height | 150-310 mm | |||
Filling Tolerance | ±2% | |||
Cap Size | 28mm and 30mm PE Standard Caps | |||
Air Pressure | 0.6MPa | |||
Air Consumption | 500 L/min | |||
Filling Water Consumption | 1.5 m3/h | 1.5 m3/h | 3 m3/h | 6 m3/h |
Rinsing Water Consumption | 0.5 m3/h | 0.5 m3/h | 1 m3/h | 2 m3/h |
Motor Power | 4.88kw | 5.88kW | 6.68kW | 7.68kW |
Voltage | 380V | |||
Dimension | (L*W*H) 2100*1500*2200mm | (L*W*H) 2100*1500*2200mm | (L×W×H) 2450*1800*2200mm | (L×W×H) 2750*2180*2200mm |
Weight | 2000kg | 2500kg | 3000kg | 5300kg |
Filling Principle | Gravity Filling |
Juice Rinsing Part
-Rotative rinsing turret one treatment, fixed nozzles, with
grippers.
-The grippers take the bottles from the inlet star-wheel while they
are still driven by the star-wheel, thus guaranteeing a safe grip.
-After the gripping, the bottle is turned upside down and cantred
above a spraying nozzle which directs a stream of rinse water into
the bottle. After the draining period the bottle is turned over to
an upright position again.
Juice Filling part
-The star-wheels drive the bottles always "by the neck" through the
rinsing, filling and capping steps. For the various types of
bottle, it is easy to adjust the structure for the operator by our
specialized design.
-Product bowl is to reduce the loss of heat.
-If the temperature is low than the setting value, the filling
valves will stop and return the last beverage in filling valve to
recycle tank and return to UHT again to sterilize with pump.
Juice Capping part
-Rotative capping turret, suitable to the application of screw
plastic caps on PET bottles
-The fixed part consists of the cap hopper, the cap feeder with
relevant motor and the cam actuating the capping heads.
-The heads are raised and lowered by the action of a follower that
is riding on a shaped cam.