Active Member
|
[China]
Address: Room 1718, 1018 Lane, Luxiang road,baoshan District , shanghai , CHina
Contact name:Victor Liu
Shanghai Npack Automation Equipment Co., Ltd. |
|
|
1-Automatic Square Bottle Labeling Machine
NP-TS Automatic double sides labelling machine also called front and back labelling machine, double sides labeller, it is application for labelling round, square, flat and unshaped and shaped bottles& containers.
MACHINE can be change into the single side labelling machine, application for round, flat or square bottle labeling
IF add a labelling head on top, it is also application for top labelling machine any surface of the products top, such caps, boxes and so on.
2-Working process of round bottles labeling machine
3-Advantages
High speed-Speed max can reach 150bottles per min subject to the label size and bottle size.
4-Main Tech
Model / technical parameters | NP-RL |
Labeling speed (pcs/min) | 40-100 (relate to material and label size) |
Labeling accuracy(mm) | ±1.0mm (material and label sizes are not counted in) |
Label size(mm) | (L)20-280mm (H)30-144mm |
Material size (mm) | Φ20-φ100mm (H)40-200mm |
Roll inside(mm) | φ76mm |
Roll outer diameter(mm) | Max:Φ350mm |
Machine size (mm) | (L)2000*(W)850*(H)1450(mm) |
Power supply | AC220V 50Hz/60Hz 1500W |
Configuration Parts of labeling machine | |||
Item | Description | Quantity | Remark |
1 | PLC | 1 | Siemens Made In German |
2 | Touch Screen | 1 | Siemens Made In German |
3 | Transducer | 1 | Delta Made in Taiwan |
4 | DC24V Electrical Source | 1 | Delta Made In Taiwan |
5 | Checking Label Sensor | 1 | Leuze Made in German |
6 | Checking bottle Sensor | 1 | Keyence Made in Japan |
7 | Optical | 1 | Keyence Made in Japan |
8 | STEP MOTOR AND DRIVER | 1 | INVONATION SHENGZHEN |
9 | SWITCH | 1 | SCHNIDER FRANCE |
10 | Emergency Switch | 1 | SCHNIDER FRANCE |
| 1 year free spare parts | ||
| 1 | wearing belts | 2pcs |
| 2 | tools | 1 set |
Installation and Debugging
-- We will send engineers to carry out installation and debugging
of the equipment in buyer's place if requested.
-- The cost for International double ways air tickets,
accommodations, food and transportations, medical shall be paid by
Buyer for the engineers.
-- The normal debugging term is 3-7days, and the buyer should pay
US$80/day per engineer.
-- If customer do not require above, then customer need to be train
in our factory. Before installation, the customer need read the
operation manual firstly. Meanwhile, we will offer an operation
video to customer.
Training
-- We offer machines training system; the customer can choose
training in our factory or in customer workshop. The normal
training days are 1-2 days.
Warranty
-- The sold machine will be guarantee in one year.
-- In the guarantee year, any spare parts broken due to supplier's
quality issue the spare parts will be supplied free for customer,
customer need to pay the freight cost if the parcel weight more
than 500gram.
-- The easy wearing out spare parts are not in the warranty terms,
such as O rings, belts which will be supplied with the machine for
one year using.
