1860105 Automobile Brake Pad Noise Reduction Auto Parts Brake Pads P1349322

1860105 New Product Auto Engine Parts Front Auto Brake Pad P1349322 Pads For Ford

Product Description:

Brake pad composition can vary depending on the application and braking needs. Commonly used materials include sintered metal, ceramic, semi-metallic and organic formulations. Ceramic and semi-metallic pads promise a good stopping power and longer life, however organic are much cheaper but tend to wear faster.

Most new pad models are equipped with small wear indicators which are molded in the friction material. Due to pad wear, these indicators poke out, giving drivers a visual warning that they will need to replace the pads soon.

Some brake pads, like ceramic, are quieter than conventional semi-metallic pads. Squealing noises may be emitted from pads when they heat up during heavy braking. This type of noise can be caused by glazed, contaminated or unevenly worn friction material.

As the pads wear down, it produces brake dust, a fine powder which collects on wheels, brakes and under the vehicles. Much of the brake dust is copper-based and certain manufactures are actively trying to lessen the copper content to reduce its release.

The type of pads used must also be compatible with the type of rotors, whether it’s cast iron or steel. In addition, some ceramic pads require specially coated rotors to prevent premature wear between the components.

Manufacturers need to strictly regulate the friction coefficient of pad materials, indicated the amount of pressure needed to applied to generate a certain braking force on the rotor or drum.

The performance of the brakes might be affected by varying temperatures and conditions, so some heavy-duty pads contain additives to decrease the effects of extreme climates.
 

Features:

Made of a combination of metals, fiber, and binders, semi-metallic brake pads usually contain copper or graphite. Despite their lower cost, they provide good stopping power even when new and they offer strong braking right away. However, they tend to produce more brake dust and noise than other types and may squeal under heavy use. Semi-metallic brake pads are also better at dissipating heat than their organic counterparts.

Ceramic brake pads are made of a ceramic-based friction material. They offer excellent stopping power and very low wear rates, resulting in long pads life as compared to semi-metallics. They run very quietly and produce minimal brake dust, making them a driver's favorite. They work well even under heavy braking and heat, plus they can withstand higher operating temperatures. Despite their costlier initial investment, they may save in the long run due to infrequent replacement needs. However, they need specially-coated rotors to prevent early wear, as ceramics are very abrasive.

In summary, semi-metallics offer good value and performance for most drivers while ceramics provide higher performance for hardcore driving conditions.

More we supply :

Applications:

Suitable for most passenger vehicles such as cars, SUVs, and trucks for everyday driving conditions. They are a great balance between performance and value.

They are especially suitable for commercial vehicles and heavy-duty applications, such as delivery trucks that do a lot of stop-and-go driving.

They are good for tow vehicles that need strong braking power to carry heavy loads.

Ideal for high-performance sports and race cars that are subjected to repeated extreme braking. Ceramic brake pads can handle the heavy braking loads.

They are great for luxury/exotic cars where low dust and noise are important and where the need for a long pad life is important.

Ceramic brake pads are also better suited for driving in very hot or cold climates because ceramics can withstand wider temperature ranges.

They are preferred for expensive specialty vehicles such as motorcycles, ATVs, and where the need for size/weight savings is important.

Finally, ceramics are well-suited for off-road vehicles such as Jeeps, where rugged use on trails and rocks is expected.

Semi-metallics handle general consumer uses while ceramics perform best in high-performance, severe duty or specialized applications requiring maximum durability and heat resistance.

Packing and Shipping:

Auto Brake Pads are packaged and shipped using durable corrugated cardboard boxes measuring 12 x 12 x 12 inches. The boxes are sealed with heavy-duty tape, and the brake pads are cushioned with foam padding to protect them from damage during transit.

The packages are labeled with the product name and shipping address. In addition, an invoice is included with the package, which includes the product name, quantity, and price.

All packages are shipped via a reliable courier service. Delivery times vary depending on the destination, but most packages arrive within 3-5 business days.

Why you choose us :

• 1. how can we guarantee quality?
  Always a pre-production sample before mass production;
  Always final Inspection before shipment;
• 2.what can you buy from us?
  All kinds of brands and models for auto parts
• 3. why should you buy from us not from other suppliers?
  - OUR COMPANY HAS A PROFESSIONAL SPARK PLUG MANUFACTURE TEAM AND ADVANCED SPECIAL EQIPMENT ,THE APPEARANCE OF PRODUCT IS ELEGANT AND
  - GOOD QUALITY . WE EXPORTED TO MANY COUNTRIES AND REGIONS SUCH AS SOUTHEAST ASIA AND THE MIDDLE EAST
• 4. what services can we provide?
  - Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
  - Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
  - Accepted Payment Type: T/T,MoneyGram,Credit Card,PayPal,Western Union,Cash;
  - Language Spoken:English,Chinese