High Speed PET Stretch Blow Molding Machine , 1.25 Litre Bottle
Blowing Machine
- Performance and Characteristics
- The servo motor has been adapted to the moulding mechanism,
triggering off a bottom mold linkage as well. The whole works with
speed, accuracy, stability and flexibility. The servo motor is
energy saving and safe for the environment.
- Heated by oil or electricity, bottles will not deform at the
temperature of 92℃, stilling qualified for the hot filling
standard. Each cavity an reach to the average output of 1000 bph.
- The whole blowing process works more efficient, flexible with the
aid of the servo motor driven stepping unit and stretching
mechanism.
- The length of the preforms ensure sufficient units heated within
the same distance without interruption.
- The thermostatic heating system ensure that the heating temperature
of each preform surface and internal is uniform.
-
- Hinged oven holders make it easy for the operators to change
infrared tubes and do maintenance.
- The high pressure blowing system is also equipped with the gas
recycling device (air recycling rate can be up to 30%)which may
reduce power consumption as much as 30kw per hour.That means you do
not need the low pressure air compressor any more, which will
minimize your investment as well as the space for placing the
machine. In one word, it is energy-efficient and environmental
safe.
- The simple slide-in way of mold mounting makes it possible for the
operators to change molds easily within 30 minutes.
- The man-machine interface is highly automated and easy to operate.
The compact machine occupies a smaller area.
- This series is applied widely in PET hot filling bottle for juice,
tea drinks ,energy drinks and other hot filling drinks.
Technical Parameter
Item | Unit | Moldel |
RiBo-6RH1.5L |
Molding Spec. | Preform Pitch | mm | 105 |
|
Preform Heating Pitch | mm | 38 |
No.of Cav. | cav. | 6 |
Container Spec. | Max.Container Volume | L | 1.25 |
|
Neck Diameter Range | mm | 18-30 |
|
Max.Containr Diameter | mm | 87 |
|
Max.Containr Height | mm | 320 |
※※ Theoretical Output | BPH | 6000 |
|
Power Spec. | Rated Power | KW | 132 |
|
Power Consumption | KW | 46~56 |
|
Compressor Spec. | Blowing Pressure | Mpa | 2.6~3.2 |
|
Air Consuming | m³/min | 14 |
|
Mold Temp.Controller | Temperature | °C | 130-160 |
Consumption | kcal/hr | 18600 |
Main Machine Spec. | Size | mm | 6843*3312*3200 |
|
Weight | Kg | 8500 |
|
Note: Due to continuous technical development specification would
be improved without prior notice.
Special designs correspond to
customers needs.