Big Capacity Powerful and long-lasting Bus Assembly Line for City Use

Maximum Capacity Of 70 Person Electric Bus Assembly Line For Mass Production

Model TEG6803BEV Overall Introduction

Powerful and long-lasting
Equipped with T6 pure electric drive system, the highest efficiency point is more than 96%; high-torque permanent magnet synchronous motor, the climbing degree is more than 20°; equipped with lithium iron phosphate battery, the longest range can reach 520km.

Lightweight body, green energy saving
Lightweight design, body weight reduction of 200Kg; application of high-strength steel QStE700TM, doubling the structural strength of the entire vehicle; equipped with a driving achievement system, which can quantify driving behavioral factors affecting energy consumption, enhance the sense of driver participation and awareness of energy saving, and promote energy saving and consumption reduction; drive, auxiliary power "power" efficiency is improved, reducing energy consumption by 10%; automatic optimization of lithium-iron phosphate battery, which has a maximum range of 520km. Energy consumption is reduced by 10%; automatic optimization of torque control algorithm, braking recovery energy ≥40%.

Human-vehicle Interconnection Intelligent Travel
Remote vehicle control
One-key diagnosis
Intelligent maintenance
Exclusive settings

Innovative Controls Drive as you wish
Newly designed instrument panel, modular design, to meet the needs of customization
Intelligent instrument display, clear, comprehensive, you can see what you want to know.
Airbag shock-absorbing driver's seat, reduce driving fatigue

Reliable quality and stable operation
Power system protection grade IP68
Can be immersed in 1.5 meters deep water for 24 hours.
High-iron level electrical connection process, reducing high-voltage connection points and improving reliability.
Extreme environment verification, more than ten years of batch application, can operate for a long time in the temperature range of -30℃~50℃, high cold, high heat, high humidity, high steep slope.

Spacious space, easy to stand and move
The rear space adopts a flat floor structure to increase the standing area; the maximum passenger capacity is up to 70 passengers; the secondary step is convenient for passengers to get on and off the vehicle.

Model TEG6803BEV Detail parameter

Detailed display pictures

Company profile

CHONGQING BIG SCIENCE & TECHNOLOGY DEVELOPMENT CO., LIMITED, We are a well-known international auto manffacturer and oversea auto investment corporation in China. Our mission is to focus on overseas investment in automotive assembly plant chain projects.Our investments include capital and automotive manufacturing technology, brands, key equipment,kit car spare parts and credit support under guarantee conditions.We are a joint venture corporation control by China national automobile corporation and China financial capital investment corporation.The Chinese government has proposed "One Belt And One Road".Chinese carmakers are keen to "go global".While helping developing countries to achieve industrialization, we should also develop ourselves.http://chainautoassembly.com is also another official site of ours.

Background of Oversea Auto KD Assembly Project

1. The Development Status of China Auto Industry. In 2016, China automobile annual output has exceeded 28 million units, far more than the total production of the United States and Japan, and it has already become the world's largest automobile manufacturing country for the last 8 consecutive years. Among them, the output of new energy vehicles produced in China reached up to 517,000 units, becoming the largest of the world, and exceeding the total output of all other countries in the world.Since 2016, China's automobile manufacturing standard has been updated to China's V standard (same level as European V standard). And the level of electric vehicle manufacturing standard launched recently by Chinese government is higher than the European standard.

Nowadays, Chinese cars have the highest cost performance. The manufacturing technology of Chinese cars, especially new energy vehicles, is in the leading position in the world; In addition, China's foreign exchange reserves are the first in the world. All these favorable factors created the necessary technical and capital conditions for Chinese automobiles towards the overseas market.

2. Most South Asia, Africa, Latin America or the Middle East countries have a single economic structure, lack of heavy industry base, and due to the complicated and volatile international political and economic situation, it becomes very urgent to develop their own domestic industries, for creating a new driving force for economic development, realizing industrial diversification, increasing employment opportunities, and ensuring a stable and healthy development of the economy. Compared with other industries, the automobile industry can promote the development of more related industries, which is a good opportunity for the developing countries.

3. In order to develop domestic industry and increase employment opportunities, the government usually charges higher tariffs on the import of complete vehicle, while lower tariffs on the import of semi-finished auto and completely knocked-down parts, for encouraging local assembly industry. For some countries, the difference between the whole car and parts are rather big, up to 200%, with great profit.

4. Generally, the expansion way of transnational enterprises in developed countries is to directly establish branch factories and outlets abroad, controlling the absolute stake to occupy the oversea markets, which squeeze the development opportunities of the local entrepreneurs. The auto industry is a capital and technology-intensive industry, such a high threshold makes the local entrepreneurs hardly to reach. Therefore, such an expansion way has largely hindered the development of the local enterprises. However, our cooperation principle is that our Group will never control large shares, but leave the local national industry a large space for growth and development.

5. China Big Group have China's automotive products and technical advantages, combining with years of overseas market experience, have been committed to search for high-quality entrepreneurs from all over the world for collaboration and setting up oversea joint venture auto assembly plants. According to local policy, market environment and our partners' economic strength, following the principle of "all start from the reality", helping our partners with customized auto industry development plans and programs for the achievement of auto industrialization by stages, providing permanent technology support. At the same time, our group realize the global distribution of chain operations through joint venture cooperation, and further integrate resources, at last, to achieve a win-win result.

Advantages of Our Cooperation on Auto Assembly Project

1.Technological advantage: China has become the No.1 auto manufacturing country in the world since 2009, and automobile manufacturing technology has been very mature. Especially the new energy automobile science and technology level is in the world leading position.

2010, China became the largest manufacturer of automobiles in the world.

2016 Chinese auto production about 28 millions units > Japanese cars production + U.S. auto production + Korea auto production

2016, the production of new energy vehicles in China was 700,000, the world's largest, surpassing the total output of new energy vehicles in all other countries .

2017, the production of new energy vehicles in China was 860,000, the world's largest, surpassing the total output of new energy vehicles in all other countries .

2018, the Chinese government released latest news that electric vehicle manufacturing standard is higher than Europe standard.

2.Cost advantage: we are the automobile manufacturing group, the overseas chain operation scale advantage makes the KD parts we offer have higher cost performance ratio.Plus cost savings of difference of importing tariff between CBU and CKD gives our final product absolute competitive advantage.

3.Capital advantage: Auto Manufacturing Group + Capital Group provides sufficient investment funds for overseas chain operations. China's huge capital strength, and the Chinese government's national strategy of Belt and Road, provide a guarantee of sustainable growth for overseas chain auto assembly plant projects . With the development of parts localization, the industrialization of the project country will be greatly improved; this is a national win-win strategy.

4.Operational advantage: Over the past 10 years, eight overseas joint ventures have been successfully managed and operated. Our overseas joint venture projects include:

1)Syria A&B auto plant;

2)Ghana MKC Auto Co.,Ltd;

3)Angola ATJ-JinBei Auto Co.,Ltd;

4)Eastern Vehicle Co.,Ltd;

5)South Asia Brilliant auto plant;

6)Middle east Brilliance-Bavarian motor Ltd;

8)Mozambique bus assembly plant;

5.Highly efficient, customized investment mode:Refined investment schemes tailored to local conditions make it possible for highly capitalized, high-tech automotive manufacturing projects to be available in developing countries; our core competitiveness include: under the win-win principle, we actually provide manufacturing technology, invest in critical equipment, train local workers, transfer manufacturing technology, and provide guaranteed financial credit support. According to the actual situation of the project, provide the customized project implementation plan (step by step, decompose the big goal into several small tasks that can be implemented step by step).

6.Excellent win-win cooperation mode:Portfolio of complementary advantages: China invests in technologies that are not available locally, key facilities; local investors have land, plant, general equipment and liquidity.

Cooperation to make up for each others weakness : China is good at production management, technical advantages, local partners are familiar with the local market, government network.

Local partner holding majority can fully mobilize the work enthusiasm of the partner.

Local partner holding majority can be regarded as national industry, easier to obtain government preferential policy support and government orders. It is easier to get more support from banks and consumers, and the joint factory will be identified as national industry; it will be easier and better to run complex social relationships that are conducive to the development of enterprises.

In short, only unity of interests results in cooperation cohesion and win-win cooperation can have sustainable growth.

7.The profiting mode of the KD assembly plant project is to make effective use of the tariff difference and freight between CBU and KD parts, and combine with the subsidy policy of local government industrial development to produce the products which are good and cheap and meet the needs of the market.

Quantification of profit sources:

A. Chinese cars have the highest cost performance ratio and very strong market competitiveness. (the advantage is about 20-30%)

B.By importing CKD, you can save tariffs and freight compared to the CBU term.-SKD/CKD terms compared to the CBU terms, import tariffs have a 25-35% difference. (25-35%) Price advantage

C.With SKD/CKD, you can ship more goods than CBU, saving freight. (cost savings 5-10%)

D.When you develop the market, there are 4S stores and our technology supply, and you can provide good after-sales service. Parts trade is a new profit growth point. Generally speaking, it accounts for about 20-30% of the total value. (20-30%)

E.You can use your own brand for the car, which is an intangible asset. (total value over50% ) We provide technical support and credit.

Cooperation Mode

According to our many years of oversea investment and cooperation practice, we have explored the following modes of cooperation. Once you have any other cooperation ideas, it is highly appreciated to contact with us.

A.Trade Agency

At first stage, we can do exporting & importing trade business, gradually build the mutual trust and favorable business relationship, and then develop to project cooperation. If our partner hasn’t gathered enough capital to do the project, this cooperation way is recommended to accumulate funds and experience for the project start later.

B.Turnkey Project/ Technology Transfer Mode

In this project, our oversea partners take 100% shareholdings, and our Group assists you with technology and all necessary equipment of the factory, all in "turn-key project" mode. You pay for the technology transfer, while we help you to establish the assembly factory and provide you automobile parts in SKD or CKD status for assembling in order to cut your cost and simplify the production process. We provide you with all the necessary technology assistance and auto parts till you can master all required technologies and be capable to assemble vehicles on your own completely.

C.Joint Venture Mode

This is our key cooperation mode, we have the following basic ways:

1st way: we take 15% of the shareholding and being responsible for offering the Business Plan Assistance, Production Line Layout & Plant Design, Equipment Installation & Debugging, Technology Support, Worker Training, Manufacturing, Production & Quality Control Management, Advice & Guidance for Sales & After-Sales, Development Plan & Solution, etc.

2nd way: we take 35% of the shareholding and being responsible for offering the Key Equipments, Business Plan Assistance, Production Line Layout & Plant Design, Equipment Installation & Debugging, Technology Support, Worker Training, Manufacturing, Production & Quality Control Management, Advice & Guidance for Sales & After-Sales, Development Plan & Solution, etc.

3rd way: we take more than 35% of the shareholding and being responsible for offering the Capital, some Credit based on reliable guarantee, Key Equipments, Business Plan Assistance Production Line Layout & Plant Design, Equipment Installation & Debugging, Technology Support, Worker Training, Manufacturing, Production & Quality Control Management, Advice & Guidance for Sales & After-Sales, Development Plan & Solution, etc.

Requirements on Our Cooperation Partners

If you start with trade business, a necessary amount of funds for vehicle cycle purchase, a decent showroom for auto exhibition and a kind of repair shop, enough. However, if you want to start the auto assembly plant project, you have to reach the following subjective and objective requirements:

• Workshop / Factory: 5000-8000 square meters to start, and a piece of an industrial land around 20000-25000 square meters for expansion in future.

• Fund: You need to have necessary economic strength & investment capacity, specifically, two million USD at least, excluding land and workshop.

• Market channel: You’d better have your own car sales channel & network, automobile related business.

• Auto import tariff policy: The import tariff policy in your country is very important, the difference of import tariff between CKD (completely knocked down) and CBU (complete built unit) shall be at least 30-35%; for example, if the import tariff on CBU is 35%, so it must be 5% or free on CKD. It is the key factor to set up an assembly plant in local overseas, however, if the import tariff on CKD is almost the same with that on CBU, the auto plant will have not any profit space and it makes no sense to start it.