Shenzhen Atnj Communication Technology Co., Ltd. |
Verified Suppliers
|
|
Cell Phone Single Band WCDMA Signal Booster Customized Grey Color
Cell Phone Booster Mobile Signal Repeater Ampilifier Single Band WCDMA
Products Spect:
GlobaL application ATNJ factory 2100MHz 3G signal repeater for your
selection:
WCDMA 2100MHz 2G/3G Pico repeater is applied specifically in small
area indoor DAS system. The base station signal is coupled and
amplified by Pico repeater into in building system. The amplified
signals is transmitted by indoor antenna. Meanwhile the indoor
antenna receives the cell phone signal, and send the signal to the
base station as uplink. This method can eliminate the signal dead
spot, reject the interference, provide the stable signal
communication for cell phone users. This Pico repeater mainly
solves the problem spot problem in building. The coverage area is
as large as 3000 square meters in open space, and 1000 square
meters in partial obstacle area, 500 square meters in complete
obstacle area. The edge power level for coverage area is above
85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the
reception of signals, amplifies the signal and re-transmits into
areas where there is no or very low signal level coverage enabling
a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It
is especially advantageous to use in 100M2-1000M2,which is a very
economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.
Technical Specifications
Specifications | Parameters | |
Frequency Range (Customers to Choose) | Uplink | 1920-1980MHz |
Downlink | 2110-2170MHz | |
Frequency Bandwidth | 60MHz | |
Gain | 80dB | |
Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 27dBm | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <=2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
Network | 3G | |
Trademark | ATNJ |
Further detail pls click here for downloading the products specification:
WCDMA 2100MHz B011A Signal Repeater.pdf
We are manufacturer, and have our own factory.
Warranty
● Please note that we always check and test the product twice
before shipping and pack them well as far as possible.If the
product is broken at receiving,please contact us,we would resend
you a new one.
● Three years warranty period for our booster,it is only 3 months
for the accessories.If the booster have any problems, please show
us an video or some photos of your complete installation, we will
help you. Please do not open dispute or leave negative feedback
before contact us.we will reply you within 24 hours,except holiday.
FAQ:
1. Are you trading company or manufacturer ? Could I use our own
logo and label? We are factory, with trading service. We provide
OEM/OEM service.
2. Can I have a sample order? What is your MOQ?
Yes, we welcome sample order to test and check quality. MOQ is 1
for normal products.
3: Is it easy to set up your items?
A: Yes. We have a user manual and support technical support 24/7.
4. What is your warranty time?
We promise 3-year warranty for all products shipped from us.
Man-made sabotage and natural factors are not within the scope of
warranty.
5. Please feel free to contact us if any other questions.