Featured Products: MTL Barrier MTL7766pac, MTL7767+, MTL7778ac, MTL7779+ Original From UK, MTL5517 SWITCH/ PROXIMITY DETECTOR INTERFACE, MTL5314 TRIP AMPLIFIER and more.
|
|
|
►Removable terminals ►Bussed power feed to other modules ►Relay and solid state switch modules ►Dual channel variants — 6.3mm per channel ►Proximity detector inputs ►Electronic ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
MTL5517 enables two safe-area loads to be controlled, through a relay, by proximity detectors or switches located in a hazardous area. Line faults are signalled through a separate ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5314 connects to a 2- or 3-wire 4/20mA transmitter or current source located in the hazardous area. It supplies one or two configurable alarm signals to the safe area via ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5053 has been specifically developed to extend 31.25kbit/s (H1) fieldbus networks into hazardous areas. It provides power and communication to devices powered through the signal ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5561 is a loop-powered 2–channel interface for use with conventional fire and smoke detectors located in hazardous areas. In operation, the triggering of a detector causes a ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5533 repeats signals from vibration sensors in a hazardous area, providing outputs for a monitoring system in the safe area. The interface is compatible with 3-wire eddy-current ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5532 isolates pulses from a switch, proximity detector, current pulse transmitter or voltage pulse transmitter located in a hazardous area. It is ideal for applications ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5531 repeats a signal from a vibration sensor in a hazardous area, providing an output for a monitoring system in the safe area. The interface is compatible with 3-wire eddy...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
A DIN-rail mounted unit for locations where a dc supply is not readily available. The wide input power supply range makes this unit universally applicable and the 24V dc , 2A ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5582B connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the resistance to a monitoring ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5582 connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the resistance to a monitoring ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5581 takes a low-level dc signal from a voltage source in a hazardous area, isolates it, and passes it to a receiving instrument located in the safe area. The module is intended ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5576–THC converts low–level dc signals from temperature sensors mounted in a hazardous–area into 4/20mA currents for driving safe–-area loads. Software selectable features ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5576–RTD converts signals from resistance temperature detectors (RTDs) mounted in a hazardous area, into 4/20mA currents for driving safe-area loads. Software selectable ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5575 converts a low-level dc signal from a temperature sensor mounted in a hazardous area into a 4/20mA current for driving a safearea load. Software selectable features include ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5573 converts a low-level dc signal from a temperature sensor mounted in a hazardous area into a 4/20mA current for driving a safearea load. Software selectable features include ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5549 accepts 4/20mA floating signals from safe-area controllers to drive 2 current/pressure converters (or any other load up to 800Ω) in a hazardous area. For HART valve ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5546 accepts a 4/20mA floating signal from a safe-area controller to drive a current/pressure converter (or any other load up to 800Ω) in a hazardous area. For HART valve ...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5000 SERIES COMMON SPECIFICATION Connectors Each MTL5000 unit is supplied with signal and power connectors, as applicable. When using crimp ferrules for the hazardous and non...
|
| [Last Updated : 2024-04-11] |
|
|
|
|
|
MTL5000 SERIES COMMON SPECIFICATION Connectors Each MTL5000 unit is supplied with signal and power connectors, as applicable. When using crimp ferrules for the hazardous and non...
|
| [Last Updated : 2024-04-11] |
|
|
