Cryo Fat Freeze Lipo Laser Machine Skin Tightening Machine RF Fat
Loss
Cryomax+ is a latest slimming system which adopt 4 advanced
technology in 1 system: RF energy, cryolipolysis, cavitation, lipolaser. It treats all the body fat
area in non invasive way, tighten Skin, makes your body slimming, shaped body and smooth effortless and
effective. Cryolipolysis also called ‘fat freeze method’ for short. (cryo –
cold, lipolysis – the breakdown of triglycerides into free fatty
acids within cells. This non-invasive ‘cold’ technology cools the
adipose tissue to induce lipolysis reducing body fat without
damaging other tissues.
TECHNOLOGY
Cryolipolysis for Fat Freezing
Cryolipolysis works by freezing fat cells to the point of natural
elimination. The cold temperature breaks down the fat cells and the
body naturally eliminates them. While the fat cells are destroyed,
the surrounding skin and structures remain safe and free of injury.
If you are struggling with fat bulges or have excess fat despite
having followed a diet and exercise plan, you may be a good
candidate for Cryolipolysis. The overall goal of the fat freeze
procedure is to reduce the volume of the fat bulges resulting in a
slimmer and more contoured body figure.
Lipolaser for Fat Melting
Lipolaser utilizing the power of 40mw-100mw diode laser, the most
suitable to physical fat reduction, the 650nm diode laser deep
blasts excess fat and melted emits low levels of laser energy,
which creates a chemical signal in the fat cells, breaking down the
stored triglycerides into free fatty acids and glycerol and
releasing them though channels in the cell membranes. The fatty
acids and glycerol are then transported around the body to the
tissues that will use them during metabolism to create energy.
Cavitation for Fat Blast
Cavitation emits a powerful double beam of low-frequency modulated
ultrasound waves on a 1 MHz carrier, produce a cavitation effect
that damages the adipose cells causing them to gradually break up.
The handpiece uses vacuum technology which lifts the adipose tissue
on which the ultrasounds will act, preserving the underlying
tissues and thus enhancing the effectiveness and safety of the
treatment which focuses only on the area involved. The major
reduction effect that can be achieved on localized adiposity and
cellulite is given by the cavitation phenomenon, provided that the
treatment is performed with low-frequency ultrasounds and adequate
power
RF for facial rejuvenation and tightening
Use the bipolar and six polar RF technology, with output frequency
5.0 MHz, power
150watts, it transfers most RF energy to your dermis skin,
effectively stimulates collagen and elastin production.
Functions
Skin tighten and smooth
Body shaping and slimming
Fat reduction
Face lift and wrinkle removal
Advantages
1. Cryolipolysis, Cavitation, lipolaser, RF 4 slimming technology
in 1 machine
2. User-friendly cryolipolysis handpiece design with 7 different
size replacement cup to treat body area, the extra chin handpiece
is supplied to treat double chin. Contact cooling area updated to
360°full contact, more area can be treatment within 1 session.
3. Focused cavitation for larger fat area treatment and better
slimming result
4. Total 8 lipolaser pads cover all body fat area, reduce fat
effortless.
5. Different RF handle for face and body tighten.
6. The super cooling system with condenser ensure long continuous
working at least 5 hours cryolipolysis treatment.
7. The high efficacy, ease of use, and cutting-edge technology
provide a strong ROI on fat removal investment.
Tech Parameters
Cooling handle size | Big handpiece 23cm*7cm, 23cm*7cm, 20cm*7cm, 18cm*7cm. Small handpiece 15cm*6cm, 15cm*6cm, 13cm*6cm Chin handpiece 8.5cm*4.3cm |
Cooling device output temperature | 0,-5,-10 ℃ |
Vacuum pressure | 0-80kpa |
Laser wavelength | Laser diode AlGalnp 635-650nm |
Max lipolaser output power | 6000mw |
lipolaser power | 100mw/pcs |
Number of diode laser | 60 |
Cavitation Modulation frequency | 40KHZ |
Max Cavitation energy density | 3W/cm2 |
RF frequency | 5MHz |
RF power | 150W |
Cooling system | Wind+water+semiconductor |
Screen | 10.4 inch color touch screen |
Voltage | 220V or 110 V, 50/60Hz |
Fuse | 220V 3A , or 110V 6A |
Machine Power | 3500 W |
Package size | 68cm*72cm*111cm+45cm*45cm*55cm |
Total Weight | 95kg |
Relative Humidity | ≤80% |
Atmospheric pressure | 88KPa ~110KPa |