|
[China]
Trade Verify
Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040
Contact name:Herbert
NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Armature Turning machine used for armature commutator outer surface turning
Features and Application:
1. The turning machine is used for armature commutator outer
surface turning
2. Single cutter , can turn more than one time
3. Positive knife
4. Three-axis servo control
5. Belt vertical pressing down mechanism
6. Loading and unloading: manual loading and unloading
7. The armature commutator turning machine is suitable for
continuous production of three shifts.
8. An actuator can be moved in any state of production or standby,
automatic and step operations can be inter-converted.
9. Manual loading/unloading production armature.
Function:
1. Turning can be set between 1 and 4 cuts, and the parameters can
be set separately: turning amount, cutting speed, belt speed, etc
2. The oil pump fills V-block with oil automatically and
quantitatively. The touch screen controls the lubrication time and
refueling times
3. It can be used for component debugging or control of single
actuator under production condition. Single operation, automatic
operation and step operation can be converted to each other
4 .Remind operators to replace vulnerable parts: turning tool, V
block and belt
5. Allow fine adjustment of the Angle between the belt and rotor
shaft
6. Total 100 rotor turning parameters can be saved in HMI.
7. The current parameters are displayed dynamically while
production: shift output, cumulative output, production timing, etc
8. Abnormal operation has automatic alarm: touch screen alarm,
buzzer alarm and alarm light alarm
Main specification:
| Name | Parameter |
| Armature OD | Ф20~Ф60 mm |
| Armature stack length | 10~100 mm |
| Shaft length | 50~250 mm |
| Length of shaft at commutator end | 6~80 mm |
| Shaft diameter at commutator end | Ф3~Ф12 mm |
| Commutator diameter | Ф12~Ф42 mm |
| Commutator roundness | ≤0.003mm |
| Commutator bar-bar roundness | ≤0.002mm |
| surface roughness | Ra 0.4 ~ Ra 1.0 |
| Maximum cutting amount | Max 0.12mm for the first cutting |
| Armature speed regulation range | Max 3000rpm |
| Z direction Feeding speed | Stepless adjustable |
| Z direction cutting return speed | non-adjustable |
| Z direction cutting length | 4 different turning lengths can be set |
| Z direction stroke | Max 40mm |
| X direction cutter feeding speed | Stepless adjustable |
| X direction cutting return speed | non-ajustable |
| X direction feeding accuracy | Min 0.002mm |
| Cutter compensation volume | Min 0.002mm |
| Rotor rotation during turning | positive |
| Air pressure | Pressure 4~6kg/cm2 |
| V-block material | Artificial PCD diamonds |
| Turning tool material | Artificial PCD diamonds |
| Turning tool type | Wide blade |
| Machine power | 6KW |
| Power | AC380V 50/60Hz |
| Machine weight | About 1100Kg |
| Workpiece operation height | 950mm±50 |
| Production efficiency | 2200-2500pcs/shift |
| Dimension | 1100mmx 900mmx1600mm |
