NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
Verified Suppliers
|
Automatic Stator Powder Coating Machine
Quick Detail:
Description:
This Coil Powder Coating Machine is used for stator coil powder
coating insulation.The machine has count function.Working hours can
be decied by customer. Machine working
ability 120~180pcs/h
Working process:
(1) Load the coil (1pc) to the sling fitting and insert each wire
head(heated) into the connection groove,compact inching cylinder.
(2) Turn on the switch (go up and down, heating, coating etc
controlled by time relay to work automatically)
(3) After finish coating (the powder adhere to the stator coil and
through melting and leveling preliminary, there's a
little powder in the inside and outside of the stator lamination,
but not melt, it can clean completely by preliminary air
blowing and subsequent cleaning).Take it down and transmit
toanother person, clean the inside and outside of the stator with
air blowing gun in the powder cleaning entrance,
then put it on the shelf (prepared by customer) for natural cooling
→ put into oven together for baking (prepared by customer,
the bake requirement of the powder in the oven is the oven
temperature rise to the needed temperature for curing
powder(this depend on the enameled wire heat- resisting temperature
and powder curing requirement), keep hot insulation for over 40
minutes).
No | Machine name | Quantity | Electrical(KW) | compressed air (m3/min) |
1 | Powder coating machine | 1 | 10 | 0.3 |
2 | Powder recycling machine | 1 | 2.2 | 0.1 |
Total | 8.2 | 0.4 |