TO-46 Package IR Infrared Thermopile Temperature Sensor 100K 3950 ISB-TS45H For Contactless Temperature Measurement

TO-46 Package IR Infrared Thermopile Temperature Sensor 100K 3950 ISB-TS45H For Contactless Temperature Measurement

Performances

______________________________________________________________________________ Download________

Dimension

unit:mm

Environmental requirements

Operating Temperature:-30℃～ +85℃

Storage Temperature :-30℃～ +100℃

Test conditions: 25℃ ambient temperature, the measured object temperature and the typical output voltage of the reactor corresponding relationship.

* Note: This parameter is tested under TO46 package plus LWP5.0 filter condition.

Spectral curve

Transmission rate %                                        Wavelength(nm)

Application

Climate control

Medical : Ear thermometer,Forehead thermometer

Non-contact temperature measurement

Industrial continuous temperature control,Industrial pyrometers

Description

Aolittel ’s thermopile sensors Temperature sensor can measure temperature by detecting the infrared energy of an object outside a certain distance. The temperature is higher, infrared energy produced would be more.

Thermopile sensing elements consist of small thermocouples on silicon chips that absorb energy and produce output signals.

These benefits include better performance and reliability as well as ease-of-use and overall simplicity when incorporating movement into a design. IR thermopiles also allow ambient temperature readings to be factored-in, thus providing greater accuracy and temperature control.

Thermopiles are mainly used for contactless temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output.The product consists of infrared filters, thermistors and other components, after TO-46 Metal encapsulated, with high reliability and high sensitivity.

Features

Thermopile IR-Sensor

For Contactless Temperature Measurement

Single Element

High Signal

Accurate Reference Sensor

TO-46 Package

High Sensitivity

NTC Thermistor Compensation

Fast Response Time

5μm Longpass Flat Filter

Precautions

1. Design restrictions

The sensor is designed for indoor use.

When used in outdoor applications, be sure to use a suitable supplemental optical filter and moisture-proof structure.

To prevent secondary failures due to operational failures or malfunctions, fail-safe features can be added in advance.

2.Use restrictions

To prevent sensor failure, operational malfunction or any other malfunction, do not use this sensor under or under similar conditions.

A. Severe changes in ambient temperature.

B. Strong vibration or vibration.

C. When passing through a place with a barrier material (glass, fog, etc.), infrared rays cannot pass through the detection area.

D. In liquids, corrosive gases and seawater.

E. Continuous use in a high-humidity atmosphere.

F. Static electric field or strong electromagnetic radiation.

G. Corrosive gas or sea breeze.

H. Dirty and dusty environment that may contaminate the optical window.

3.Welding restrictions

A. Soldering with soldering iron. The soldering temperature is at 260°C for 10 seconds. Avoid overheating the sensor pins for a long time.

B. All flux must be washed off after soldering and rinsed with a brush. Using an ultrasonic cleaner may cause performance problems.

4.Product use restrictions

Use and sell under any applicable law or regulation.

Incorrect handling or storage due to incorrect use of the sensor is not the responsibility of the manufacturer.