|
[China]
Trade Verify
Address: F1-3,Building Ⅱ,NO.52 Nanxiang 3nd Road, Hi-Tech Industrial Development Zone, Science City,Guangzhou 510663
Contact name:QiDa
Guangzhou QIDA Material & Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Barcode Labeling
58kHz Frequency
label length 45mm ± 0.2mm
label width 10.8mm ± 0.2mm
Polystyrene/polyethylene 0.35mm thickness
Frequency | 58kHz |
label length | 45mm ± 0.2mm |
label width | 10.8mm ± 0.2mm |
label thickness (excluding liner) | Maximum1.9mm |
label thickness(including liner) | Maximum 2.0mm |
Detailed Product Description
sourcing tag
The Q001 Label provides adequate detection and very high
deactivation performance.
sourcing
tag
Low-price AM labels are available in a wide range of standard
and custom styles and are available in sheets and rolls to
accommodate retailers with source-tagging and other in-store
product protection requirements.
Electrical Specifications
Frequency : 58kHz
Deactivation : 100%
Operating Distance: Up to 2m (8ft) in Dual Pedestal System.
Materials of Construction
1 . Plastic housing
2 . Resonator
3 . Laminate
4 . Bias
5 . Adhesive
6 . Release Liner
plastic housing : Polystyrene/polyethylene 0.35mm thickness.
resonator(s) : Amorphous alloy material.
Laminate : Low Density Polyethylene / Polyester /Polyethylene
0.12mm
Bias : Semi-hard magnetic material
Laminate : Low Density Polyethylene/Polyester 0.08mm
Adhesive : Double-coated acrylic-based adhesive
Minimum peel strength:≥15 N/25mm
release liner : Double-sided, silicon-coated Kraft liner 0.12mm
thick
Environmental Constraints
Shelf Life: Two year from date of manufacture when Labels are
stored between15-32 (60°F -90°F) and 30-80%RH.
Temperature: Maximum storage temperature not to exceed 50 (122°F)
for 96hours at 80% RH.
Humidity: Unaffected by 80% humidity at 50(122°F), up to 96 hours
Usage Instructions
Place in least conspicuous location.
Do not cover warnings, expiration dates or important consumer
information.
It is recommended that the surface to which the label is applied be
clear and free of all dirt, grease, oil, etc.
Ambient magnetic field of labeled product greater than 100mG may
result in reduced label performance.
Label not to exceed temporary magnetic field exposure greater than
8 Gauss.
