Shenzhen Wensidun Technology Co., Ltd. |
|
Oxytetracyline Rapid Test Strip for Milk 96 Tests/Kit Detection limit 5 ~ 10 ppb
1. Specifications:
8 pcs/bottle, 12 bottles/box
2. Introduction
This product is used for the qualitative detection of
oxytetracycline in milk samples (pure milk and fresh milk) and goat
milk samples. The entire testing process takes only 6 minutes, with
simple operation and high sensitivity.
3. Detection limit:
5-10ppb (ug/kg)
4. Content
Oxytetracyline test dipsticks | 8 dipsticks/bottle |
Red powder micro-wells | 8 micro-wells/bottle |
Manual | 1 piece |
Desiccant | 2 pieces/bottle |
5. Principles
Oxytetracycline rapid test strips are based on the principle of
competitive inhibition immunochromatography. During the flow
process, the oxytetracycline in the sample binds to the
oxytetracycline-specific colloidal gold-labeled monoclonal
antibody, which inhibits the binding of the antibody to the
oxytetracycline-BSA conjugate on the detection line of the NC
membrane, causing the detection line to change. color. When the
sample has no oxytetracycline residue or the concentration is below
the detection limit, the T line is deeper than the C line. When the
concentration is at or above the detection limit, the T line is
significantly lighter than the C line, or the T line has no color,
or the T line is the same color as the C line. The C line appears
whether or not oxytetracycline remains in the sample, indicating
that the test is valid.
6. Operating procedures
6.1 Please read the manual carefully before use. Return the test
strip and sample to room temperature.
6.2 Take out the required bottle from the kit, take out the
required microwell and test paper, and make a mark. Please use
these test strips within 1 hour. Seal lid to avoid moisture.
6.3 Take 200ul of the sample to be tested in the microwell, and
suck it for 5 times to make the sample and the reagent in the
microwell fully mixed until the naked eye judges that there is no
solid (this is very important step).
6.4 (40±2℃) incubate for 3min, then insert the test paper into the
microwell, and the “MAX” end is completely immersed in the mixed
solution.
6.5 Insert the test strip into the microwell for 3 minutes to read
the result, other time is invalid.
7. Interpretation of test results
Color depth comparison of T line and C line | Result judgment | Result analysis |
T line > C line | Negative | Oxytetracyline residue is lower than detection limit in sample |
T line = C line | Weak positive | Oxytetracyline residue is equal to detection limit in sample |
T line < C line or T line is invisible | Positive | Oxytetracyline residue is higher than detection limit in sample |
C line is invisible | Invalid | The test dipstick is invalid, test again |
8. Precautions
1) Test strips can only be used once at room temperature, do not
use expired test strips.
2) Please seal the bottle after taking out the required test
strips. If you cannot use all 8 microwells at once, return the
remaining cups to the bottle and seal.
3) Do not touch the white film surface in the middle of the test
card, avoid direct sunlight and direct blowing of fans.
4) The milk sample to be tested should be completely liquid without
any clumping and sedimentation.
5) Use the test strips again for a positive result.
9. Specificity
Tests 500ppb sulfonamides, quinolones, chloramphenicol, melamine
and other drugs. All results were negative.
10. Storage and expiration date
Storage: 2-8 ℃ dark, sealed, dry place, not frozen.
Expiration date: 12 months; production date is on the box.
Q1: When will it be shipped?
A1: We will ship the goods for you as soon as possible within 7
working days after receiving the payment. (In case of external
factors such as the epidemic, the delivery may be delayed)
Q2: Does it support OEM/ODM?
A2: It can be supported, but the specific quantity needs to be more
than 100,000 pieces to facilitate customized products.
Q3: How is your factory doing in terms of quality control?
A3: We have ISO9001 and ISO13485 certified by the state. Our
production process is in accordance with the standard process,
which can ensure that the quality of the products is optimal.
Q4: How is after-sales service provided?
A4: We provide professional online technical after-sales service.
We can provide you with one-on-one guidance in the form of video,
phone calls, etc.
Q5: What is the payment method?
A5: We receive payment by T/T.
Q6: How to ship?
A6: By obtaining quotations from our many cooperative carriers,
choose the best way to ship for you, or you can ship according to
your requirements.