KISSH Monkeypox Virus Antigen Rapid Test Kit
【Product Description】
The product is a lateral flow chromatographic immunoassay for the
qualitative detection of monkeypox virus antigen in human whole
blood, serum, plasma , rash exudate or nasal swab.
【Specification】
1 pc/Box, 5 pcs/Box, 20 pcs/Box
【Components】
- Individually packed test cassette
- Droppers/ Swab
- Specimens dilution tube/extraction tube with buffer
- Instructon for Use (Package Insert)
【Test Procedure】
Nasal swab:
1.Insert the entire absorbent tip of the swab into your nostril,
but do not insert the swab more than ¾ of an inch (1.5 cm) into
your nose.
2. Slowly rotate the swab in a circular path against the inside of
your nostril at least 4 times for a total of 15 seconds.
3. Using the same swab, repeat this process for the other nostril
to ensure that adequate sample is collected.
4. lnsert the swab into the extraction tube with buffer;
5. Roll the swab at least 6 times while pressing the head against
the bottom and side of the extraction tube.
6. Leave the swab in the extraction tube for 1 minute.
7. Squeeze the tube several times with fifingers from outside of
the tube to immerse the swab. Remove the swab. The extracted
solution will be used as test sample.
Rash Exudate:
1. Wipe the rash exudate with a sterile swab;
2. lnsert the swab into the extraction tube with buffer;
3. Roll the swab at least 6 times while pressing the head against
the bottom and side of the extraction tube.
4. Leave the swab in the extraction tube for 1 minute.
5. Squeeze the tube several times with fifingers from outside of
the tube to immerse the swab. Remove the swab. The extracted
solution will be used as test sample.
【Interpretation of Results】
Positive: * A color band in the quality control area (C) and a color band in
the T area.
* Note: The color bands in the test area (T) may appear in
different shades of color.
However, within the specified observation time, no matter the color
of the color band is dark or light, even if there is only a very
weak color band, it should be judged as a positive result.
Negative: only one color band appears in quality control area (C), no color
band appears in test area (T). Negative results indicated that no
substance under test could be tested in the specimen.
Invalid: no color stripe appears in the quality control area (C), the
result is considered invalid. Some causes of invalid results are
because of not following the directions correctly or the test may
have deteriorated beyond the expiration date. In any case, it
should be retested. If the problem persists, stop using this lot
number immediately and contact with your local supplier.
