Az91 Hot Water Heater Magnesium Anode G97 Water Heater Rod

Low Polarizability Water Heater Magnesium Anode Small Density Large Capacitance

Introduction:

Water heaters usually use titanium steel or manganese steel metal liner, and then coat the enamel on the metal inner surface. Under the condition that the enamel coating on the inner surface of the metal is intact, the insulation performance between the magnesium rod and the metal liner is good, reaching the insulation resistance, which is more than 3M ohms. However, when the enamel liner is cracked locally, a resistance is formed between the magnesium anode and the metal liner through water, and the magnesium negative electrode starts to output current, and a polarizing film is generated on the exposed metal liner to repair the damaged enamel and metal.

Specification:

Features:

• The potential is relatively negative, the polarizability is low, the density is small, the theoretical capacitance is large, the effective potential difference with iron is large, and the protection radius is large.
• Through secondary refining, high purity, less impurities and dense structure
• Small grains, high current efficiency and good electrical properties
• The content of flux slag is low
• The surface is smooth, clean, free of pores, shrinkage cavities and slag inclusions
• Products of different specifications can be designed and produced according to user requirements to meet customer needs

Regular replacement:

Because the magnesium rod is in the water for a long time and used for a long time, the magnesium rod is continuously dissolved in the water, and finally becomes a sponge rod, and the weight is reduced. When the weight is reduced to one-third of the original weight, the magnesium rod should be replaced. Magnesium rods can generally be used for about a year. They are wearable parts and have no effect on the use of the electric water heater, but regular maintenance of the electric water heater is also a must.

Photos: