Active Member
|
[China]
Address: Bin Hai Economic Development Industrial Zone. WenZhou,ZheJiang Province,China
Contact name:Andy You
KCM TECHNOLOGY GROUP CO.,LTD |
|
| End Connection:: | Thread | Design Pressure.: | PN10 , 16 |
| Filter Mesh Size.: | As Your Requirement | Design Specific Fluid Gravity.: | Design Specific Fluid Gravity. |
| Body: | PVC | Filter/ Screen: | SS 304 / SS 316 / Stainless Steel |
| Size: | DN 15~DN50 | Medium: | Water, Oil, Gas Etc., |
PVC Y Strainer By Thread End Connect, Clear Body , Clean Body
Brief introduction:
The strainer may be used on all types of pipelines to collect granulated foreign substances and
contaminants collected. It can improve the clearance in the medium, and prolong the life of valves
and other equipments. It is suitable for wafer, petroleum and steam.
www.kcmtech-valve.com
Mail part & material
Body: gray cast iron, cast iron, ductile iron
Filter: stainless steel
O-ring: NBR
Technical Specification
- Nominal diameter:65～500mm
- Nominal pressure:1.0/1.6/2.5Mpa
FEATURES
• Iron strainers are complete with Flat Face (Series
125YF) or Raised Face (Series 250YF)
flanges in accordance with ASME B16.1.
• Strainer body meets applicable ASME Standard.
• One piece cast body.
• Strainers equipped with bolted cover flange that
utilize a flat gasket seal.
• Low pressure drop.
• Upper and lower machined seats.
• 304 SS perforated screens are standard.
• Drain/Blow-off connection furnished with plug as
standard.
• Generous screen area and properly proportioned
straining chamber to minimize initial pressure
drop while maximizing time between cleanings.
• Compact end to end dimension.
www.kcmtech-valve.com
STRAINER INSTALLATION INSTRUCTIONS
A . Ensure all machined surfaces are free of defects and that the
inside of the
strainer is free of foreign objects.
B . For horizontal pipelines, the strainer should be
installed so that the drain
connection is pointed downwards.
C . For flanged end strainers, the flange bolting should be
tightened gradually in
a back and forth clockwise motion.
D . Once installed, increase line pressure gradually and
check for leakage around joints
E . If the strainer is supplied with a start-up screen,
monitor pressure drop carefully.
| SIZE | INCH | 2 | 2½ | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 |
| MM | 50 | 65 | 80 | 100 | 130 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | |
| A | INCH | 7.875 | 10 | 10.125 | 12.125 | 15.625 | 18.5 | 21.625 | 25.75 | 30 | 33.25 | 38.75 | 43.12 |
| MM | 200 | 254 | 257 | 308 | 397 | 470 | 549 | 654 | 759 | 846 | 984 | 1095 | |
| B | INCH | 5.25 | 6.5 | 7.5 | 9 | 13.125 | 15.75 | 18 | 18.5 | 22 | 28.625 | 30 | 31 |
| MM | 133 | 165 | 190 | 227 | 335 | 401 | 457 | 471 | 557 | 727 | 762 | 788 | |
| C | INCH | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 |
| MM | 51 | 65 | 76 | 102 | 127 | 152 | 203 | 254 | 305 | 356 | 406 | 457 | |
| Weight | kgs | 13 | 16 | 21 | 30 | 43 | 60 | 90 | 140 | 175 | 392 | 627 | 1032 |
DN | G | L | E | B | H |
6 | 1/4" | 65 | 11.5 | 24 | 42 |
10 | 3/8" | 65 | 13 | 24 | 42 |
15 | 1/2" | 65 | 14 | 26 | 43 |
20 | 3/4" | 80 | 15 | 32 | 50 |
25 | 1" | 89 | 17 | 41 | 60 |
32 | 1-1/4" | 105 | 20 | 49 | 64 |
40 | 1-1/2" | 120 | 20 | 56 | 70 |
50 | 2" | 140 | 22 | 69 | 88 |
Specification
Nominal pressure(Mpa) | PN | 2.5,4.0 |
Strength testing pressure(Mpa) | PT | 3.8,6.0,9.6 |
Low pressure seal test(Mpa) |
| 0.6 |
High pressure seal test(Mpa) |
| 2.8,4.4,7.04 |
Applicable medium | water, oil, gas, nitric acid, acetic acid | |
Applicable temperature | -40～180℃ | |
Main part & material
Part name | Material |
body | WCB,ZG1Cr18Ni9Ti,CF8,CF8M |
Mesh | 1Cr18Ni9Ti 304,316 |
stem | 1Cr18Ni9Ti 304,316 |
packing | Polytetrafluoroethlene(PTFE) |
KCM TECHNOLOGY GROUP CO.,LTD
Address: Bin Hai Economic Development Industrial Zone.
WenZhou,ZheJiang Province,China
Tel :+0086-577-86879200
Fax :+86-577-86918728
Phone :+86 13175600492
Skype :Andy YOU 229
Web:www.kcmtech-valve.com&www.andy-valve.com
Email:admin@kcmtech-valve.com&sales@andy-valve.com
Main products:Cast steel(iron) gate check globe ball
valve,strainer(API600)
Forged steel gate,globe,positionswing check valve(API602)
Forged steel ball valve,SS gate glove check ball valve(API603)
Stainless steel Camlock&grooved couplings,screwed fittings
