Active Member
|
[China]
Address: 4F, Building 4, GuoLe Technology Park, LiRong RD, DaLang, LongHua Dist. Shenzhen, China
Contact name:Cherry Liu
ANC International Co., Limited |
|
|
25G SFP28 LR SM 1310nm 10km Fiber Optic Transceiver For Industrial
Temperature
Description
25G SFP28 LR single-mode 1310nm 10km transceiver is SFP28 module
for duplex optical data communications support up to 25.78Gb/s. It
is with the SFP+ 20-pin connector to allow hot plug capability.
Digital diagnostic functions are available via an I2C. It has
built-in clock and data recovery (CDR). This 25G SFP28 LR optics module features a highly reliable 1310nm
DFB transmitter and PIN photo-detector into duplex LC optical
connector, providing links up to 10km over single-mode fiber. It can be Cisco, Juniper, Brocade, HW etc compatible.
ANC 25G Transceivers include SFP28-SR, SFP28-LR, SFP28-ER,
SFP28-BIDI, SFP28-CWDM and SFP28-DWDM. It offers connecting
solution from 100m to 40km for data centers, high speed network and
5G. 25G SFP28 comes from the fact that it is a Small Form-factor
Pluggable (SFP) and its electrical interface can handle a channel
of 25G, potentially up to 28G.
Features
Up to 25.78 Gb/s bi-directional rate
Hot-pluggable SFP28 footprint
Built-in digital diagnostic functions
1310nm DFB laser transmitter
Duplex LC connector
RoHS compliant
Up to 10 km on 9/125μm SMF
Metal enclosure, for lower EMI
Single 3.3V power supply
Power dissipation <1.0W (0~70°C)
Power dissipation <1.2W (-40~85°C)
Industrial and Commercial operating temperature optional
Compliance
ESD to the Electrical PINs: compatible with MIL-STD-883 Method 3015
ESD to the Duplex LC Receptacle: compatible with IEC 61000-4-2
Immunity compatible with IEC 61000-4-3
EMI compatible with FCC Part 15 Class B EN55022 Class B (CISPR 22B)
VCCI Class B
Laser Eye Safety compatible with FDA 21CFR 1040.10 and 1040.11
EN60950, EN (IEC) 60825-1,2
RoHS compliant with RoHS 2 (2011/65/EU)
Applications
25GBASE-LR Ethernet Data Center Networks
Ethernet
CPRI & eCPRI
Metro Area Networks
Optical Characteristics (TOP=25°C, Vcc=3.3 Volts)
| Parameter | Symbol | Min | Typ | Max | Unit | Ref. |
| Transmitter | ||||||
| Output Opt. Power | PO | -7 | +2 | dBm | ||
| Optical Wavelength | λ | 1259 | 1310 | 1325 | nm | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Spectral Width(-20dB) | σ | 1 | nm | |||
| Optical Extinction Ratio | ER | 3.5 | dB | |||
| Receiver | ||||||
| RX Sensitivity @25.78Gb/s | SEN | -13.5 | dBm | 1 | ||
| RX Sensitivity OMA@25.78Gb/s | SEN | -12 | dBm | 2 | ||
| Receiver Overload@25.78Gb/s | Po | 2 | dBm | |||
| Optical Center Wavelength | λC | 1260 | 1610 | nm | ||
| LOS De-Assert | LOSD | -15 | dBm | |||
| LOS Assert | LOSA | -30 | dBm | |||
| LOS Hysteresis | 0.5 | 5 | dB | |||
Notes:
1. Measured with data rate at 25.78Gb/s, BER less than 5E-5 with
PRBS 231-1. This value is informative and not the principal
indicator of signal strength. A received power below this value
cannot be compliant; however, a value above this does not ensure
compliance.
2. Measured with data rate at 25.78Gb/s, BER less than 5E-5 with
PRBS 231-1.
Mechanical Dimension
ANC Small Form Factor Pluggable (SFP28) transceivers are compatible
with the dimensions defined by the SFP Multi-Sourcing Agreement
(MSA). Dimensions are in mm.
Eye Diagram
