Active Member
|
[China]
Address: 363/404,xihu east rd., wuxi city, china
Contact name:anna
AMAN MACHINERY |
|
|
Plastic bottle making machine injection blow moulding machine
Main Technological parameters
No | Item | Unit | Data | No | Item | Unit | Data | ||||||||
1 | Dia of screw | Mm | 45 | 13 | Die-heating power | Kw | 1.6 | ||||||||
2 | Max. the retical capacity | Cm3 | 286 | 14 | Pressure of hydraulic system | Mpa | 1.4 | ||||||||
3 | Total power for cylinder-heating | Kw | 10 | 15 | Max. working pressure of comp. air | Mpa | 0.8 | ||||||||
4 | Clamping force of injection mold | Qty | 3 | 16 | Discharge rate of compressed air | M3/min | >0.8m3/min | ||||||||
5 | Clamping force of injection mold | Kn | 450 | 17 | Consumption of cooling water | M3/h | 3 | ||||||||
6 | Injection mold Opening stroke | Mm | 70 | 18 | Dimension of machine(L×W×H) | Mm | 4000*1670*2350 | ||||||||
7 | Opening force if blow mold | kn | 52 | 19 | Machine weight | T | approximately 6.0 | ||||||||
8 | Opening stroke of blow mold | mm | 120 | 20 | Range of formability products | L | 0.005-0.8 | ||||||||
9 | Idle time | S | 8 | 21 | Height of formability products | Mm | ≤200mm | ||||||||
10 | Max. plate size of die(L*W) | Mm | 480*390 | 22 | Dia of formability products | Mm | ≤100mm | ||||||||
11 | Min. die thickness | Mm | 240 | 23 | Noxxle thrust stroke | Ton/min | 3.1/200 | ||||||||
12 | Motor power | Kw | 22 | 24 | Cover and area | mm | 4000*5000 | ||||||||
Cavity number of one mold corresponding to products volume.(for references) | |||||||||||||||
Product volume(ml) | 8 | 15 | 20 | 40 | 60 | 80 | 100 | ||||||||
Cavity quantity | 8 | 6 | 6 | 5 | 5 | 4 | 3 | ||||||||
1.Usage:
The machine adopts injection blow molding technology and once-molding technology. It is a bottle blower of making hollow bottles. It can produce high grade bottle whose bottleneck has high precision.
2.Application:
It is widely used manufacturing package bottles in pharmacy,food,cosmetics,chemical and other trades.
3.Composition:
The machine is composed of injection section, injection-blowing molding section, rotary lifting section, stripping section, hydraulic control section, electric control section, blow control section and others. An air compressor and two mould temperature controllers must be bought by consumer or are equipped according to the contract.
4.Packing : Export packing
5.Characteristics:
(1)It adopts a thermal flow system and high-pressure injection molding
(2)Adopts single-screw stem horizontal injection method
(3Adjust rings can be fixed in mechanical, hydraulic, aircontrol, electric and others to ensure the technological demands of different products.
(4)Strong applicability to raw materials
(5)Low-mould protection, proportion pressure, proportion flowing adjustment and other functions
