QDM902 Single Phase G1/4" Pneumatic Diaphragm Pump

QDM902 Single Phase Pneumatic Diaphragm Pump For Mix Ink For Printing Machine
    Brief

    Pneumatic diaphragm pump is a new type of conveying machinery. Its power supply is compressed air. It can take out various corrosive liquid with particles, liquid with high viscosity, volatile, poisonous. It is suitable for water-based ink printing, four plate printing machine, flexo and glue laminating machine, with liquid with particles, and the cycle of various flammable liquid delivery system. It can take out various corrosive liquid with particles, liquid with high viscosity, volatile, poisonous. Widely used in pharmaceutical, sewage treatment, food, chemical, automobile, paint and other industries.

    Specification

    Principle
    It takes the air as momentum which compressed by air compressor. The needle valve adjust the air flow, which drive the membrane, then the pump transport the liquid.
 

Features

1. Because it is using air as power, the diaphragm pump does not heat and produce sparks; suitable for use in flammable and explosive environment.
2. Use Special material diaphragm, can be used for chemical properties relatively volatile liquid, corrosive medium.
3. Diaphragm Pump can pump particle liquid;
4. The liquid can be conveyed by diaphragm pump is wide, the viscosity from low to high, from corrosive liquid to viscous liquid.
5. Diaphragm Pump is small, light and easy to move.

    The scope of application
    Printing industry

    Chemical industry producing printing ink(water-based, oily) solvent, ethanol, tuluol, acetone, dope and so on

    Other industry need the safe pneumatic pump.

    Characteristic
1. Low air consumption, the medium flow regulation is stepless regulation, and it is adjusted by air inlet valve.
2. Membrane is made of corrosion resistant material, so it can be used to transport corrosive medium.
3. Low failure rate, easy to install, convenient maintenance.
4. The pump shell is made of high quality material, the inner parts are made of stainless steel and copper, all of those make the pump light, beautiful, stainless and anticorrosive.