Active Member
|
[China]
Address: Jianmei Buliding, No.22 Xincheng Avenue, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Contact name:Mr. Kovan Jiang
Foshan Kaiya Aluminum Co., Ltd. |
|
|
Casement Doors Window Aluminum Profiles For Fixed Glass Panelling Mill Finished
Coloring Processing:
1: Process parameters: SnSO4 5-6g/l; NiSO4 16-18 g/l; 9-12 g/l 17-20 stain free acid; g/l; pH =0.8-1.2, bath temperature of 19-21 DEG C, coloring voltage should be lower than the oxidation voltage 14-16V; usually add the following ratio: SnSO4:NiSO4=1:1; color additives: SnSO4=1:1
2: Coloring products only with a single row of double row rolling way, the corresponding width of the spacing between two adjacent products or products, generally with the finger test more than two finger width, tie line must be tight, solid bar can only use the new tie line;
| Class | Min-av erg film thickness | Min-part film thickness |
| AA10 | 10 | 8 |
| AA15 | 15 | 12 |
| AA20 | 20 | 16 |
| AA25 | 25 | 20 |
General Chemical Composition of Alloy
| Alloy | 6063(%) | 6061(%) | 6082(%) |
| Silicon Si | 0.20~0.60 | 0.40~0.80 | 0.7~1.2 |
| Iron Fe | 0.35 | 0.70 | 0.5 |
| Copper Cu | 0.10 | 0.15~0.40 | 0.1 |
| Manganese Mn | 0.10 | 0.15 | 0.4~0.8 |
| Manganese Mg | 0.45~0.90 | 0.18~1.2 | 0.6~0.8 |
| Chromium Cr | 0.10 | 0.04~0.35 | 0.25 |
| Zine Zn | 0.10 | 0.25 | 0.2 |
| Titanium Ti | 0.10 | 0.15 | 0.1 |
| Others(each) | 0.05 | 0.05 | 0.05 |
| Others | 0.15 | 0.15 | 0.15 |
| Aluminum | Remainder | Remainder | Remainder |
Mechanical Properties of Sections under Room Temperature
Alloy | State | Tensile strength test | Hardness test | ||||||||
| Tensile strength Rm M pa | Non-proportional Stretching Stress | Stretching rate | Pattern thickness | HV | HW | ||||||
| Rp0.2Mpa | (A50mm%) | mm | HV | HW | |||||||
| 6063 | T4 | 130 | 75 | 14 | - | ||||||
| T5 | 160 | 110 | 8 | 0.8 | 58 | 8 | |||||
| T6 | 205 | 180 | 8 | - | |||||||
6061 | T4 | 184 | 110 | 16 | - | ||||||
| T6 | 265 | 245 | 8 | - | |||||||
| 6082 (6351) | T4 | 205 | 110 | 12 | - | ||||||
| T6 | 290 | 250 | 6 | - | |||||||
Q: How to ensure the quality of your products?
|
Q: How can we get your price ?
|
Q: What’s the thickness for anodizing? Can you do 15um? A: Our normal thickness is about 10 um. Yes, we can do 15um and above.
|
Q: What color you can do for powder coating? The thickness for powder coat? A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.
|
Q: What color you can do for wood grain? A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
|
Q: What’s the delivery time for samples and mass production? A: (1). 2-3 weeks to open the new mold and make samples. (2). 3-4 weeks after receipt of deposit and confirmation of the order.
|
Q: What is your terms of payment?
|
Q: How do you make our business long-term and good relationship?
|
About us :
Foshan Kaiya Aluminum Co., Ltd is a comprehensive and professional enterprise integrating research, design production and sales of aluminium extrusion profiles for construction and industrial applications. There are currently 24 aluminum extrusion process lines at 500MT TO 2500MT, 5 process lines for anodizing, 3 process lines for powder coating, 2 process line for painting, 2 process line of polishing and brushing. We still have 2 packing line. Our annual production capacity has reached 80,000 tons which is at the forefront of the aluminium industry in China.
Our advantage:
