Active Member
|
[China]
Address: No. 1-8, Ruyi Road, Xiabai, Luocun, Shishan Town, Nanhai District, Foshan City, Guangdong Province, China
Contact name:Sophie
Foshan Homedeco Metal Co., Ltd. |
|
|
aluminum Profile for wooden floor Finishing strip tile edge trim
| Name | aluminium l shaped trim, bathroom tile edge trim, t section tile trim, l shaped tile trim, outside tile corner trim, metal edge trim for ceramic tile |
| Material | Aluminium Alloy 6063 |
| Right Angle Size | 15mm / 2.5cm, other size 10mm, 20mm, 25mm, 30mm |
| Length | 2.5m or 2.7m, can be customized |
| Surface Treatment | Anodised, Polishing, powder coating, mill finish |
| Color | Silver or other color can be made,such as Shiny Gold, Matt Gold, Rose Gold,Champagne, Glossy Bronze |
| Feature | Easy install, Smooth surface, Grace surface |
| Package | Stick transparent film every piece, 100 pieces in 1 carton |
| Application | Tile Protection Tile Decoration, Floor, Aluminium Tile Trim Profile, marble, UV board, Window |
| Installation Introduce | Using silicone glue / titebond paste to bond with other materials such as brick, stone, wood, glass. |
Finishing strip: The wooden floor is paved and needs to be finished. It is often used on wooden floors to pave window sills, split-level edges, stair step edges, outdoor doors and entrance doors.
There is another way to use it at the junction of the wooden floor
and the wall where skirting is not installed. For example, if a
custom-made wardrobe is made, and there is no wooden floor under
the wardrobe, then the wooden floor can only be used with edge trim
at the foot of the wardrobe.
If it appears in places other than the top, it is a buckle or bead.
The function of the buckle is: the floor has a seam here, so it needs to be covered. In addition, in order to prevent the height difference from tripping people, the edge of the floor is pressed with a bead to make a slope, which is often found at the junction of the kitchen and the dining room.
The layering is to compromise with the floor
Good floor and good construction, wooden floors should not cause
any problems in the whole house.
The so-called whole house paving means to start with one wall, one floor to join the other, cut the floor when encountering the wall, and finish the floor like a jigsaw puzzle.
If the floor is hollow, the gap is too large, and the warping is not done when laying the floor, it has nothing to do with the process of laying the whole house. And now many wooden floors have applied the lock technology, which can control the size of the gap between the floors, and can achieve seamless splicing, without the problem of leaving the expansion joints wide or narrow.
The whole house is floored and the workers are unhappy, because the corners have to be cut, and the construction is troublesome. Workers generally let the floor be laid separately, which is cheaper. The so-called separated floor means that the wooden floors of the room and the living room are not aligned, which saves money. Many materials, the same principle, are the same as floor tiles.
If you don’t like the crimping strip, the trimming strip will stop it.
Adding cement when paving the tiles will definitely be thicker than the floor. Whether there are anti-slip patterns on the sides of the strips. If the anti-slip patterns are too deep, it may affect the adhesion of the two sides of the floor, leaving a gap to hide dirt.
In general, choosing to lay wooden floors throughout the house can prevent the floor battens from appearing in visible places, but it is still unavoidable to use them when you encounter wooden floors with steps.
The invisible edge trim also requires a combination of materials and processes, and the cost will be high. It's true that the edge trimming is not just what you want. What do you think?
