|
[China]
Trade Verify
Address: No. 521-15, 5th Floor, Shili Building, Hongzhuan Road, Jinshui Area, Zhengzhou, Henan, China
Contact name:Wang
HENAN HOBE METAL MATERIALS CO.,LTD. |
|
Verified Suppliers
|
|
|
Quick Detal:
1. Alloy: 1100, 1050, 1060, 3003
2. Temper: O, H12, H14
3. Thickness: 0.3mm ~ 10mm
4. Diameter: 20mm - 1300mm
5. Type: Disk, Round sheet, Circle,Disc
6. Min order: 500kgs each size
7. Payment TT or Irrevocable LC at sight
Description:
1. General Description
1100 1050 3003 5052 hot rolled cookware aluminum discs ,THICKNESS
IS THE KEY TO QUALITY
Aluminum is the most common material for cookware, as it is an
excellent conductor of heat and is inexpensive compared to copper
or stainless steel. Although features such as the lid, handle and
finish are important, thickness is the key element of quality. The
thicker the pan, the better the heat dispersion, which reduces the
chance of "hot spots" occurring. Remember, since an aluminum pan is
all aluminum, heat spreads evenly over the total surface, including
the side walls. Traditional stainless steel pans spread heat evenly
only on the copper or aluminum base.
1100 1050 3003 5052 hot rolled cookware aluminum discs —THE GOOD
AND THE BAD
When it comes to quality in plain aluminum pans, it is a story of
the "very good" or "very bad." Tour your favourite restaurant's
kitchen and you will see primarily plain aluminum pans, especially
huge stockpots. Why? Performance. Thick gauge pans needed for
rugged commercial use are less expensive to manufacture in aluminum
than stainless steel or copper. However, due to aluminum's low
cost, it is also perfect for the "very bad" thin-gauge cookware.
Most stores do not carry plain aluminum pans.
The is DC and CC quality for the cookware aluminium discs, but the
DC quality is better . If you you DC quality can produce
perfect smooth cookingware,can use long time.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | --- | --- | 0.05 | 0.03 | 99.6 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | --- | --- | 0.05 | 0.03 | 99.5 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | --- | --- | --- | 0.1 | --- | 99.0 | |
| 1200 | 1.0 | 0.05 | 0.05 | --- | --- | --- | 0.1 | 0.05 | 99.0 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | --- | --- | --- | 0.1 | --- | remainder |
Specifications:
| Description | aluminum discs |
| End Use | kitchen,cookingware,trafic signs, kettle,pot, pan,lamp cover, lighting relective cover |
| Alloy | A1050,A1100,A1070,A1060,A3003,A5052 |
| Temper | O(soft),H22,H14,H16,H18 |
| Thickness | 0.2mm to 6.0mm |
| Diameter | 100mm to 1200mm |
| Packing | Export seaworthy packing |
| Surface | Plain,Bright,No Marks |
| Grade | DC and CC |
| Tensile Strength | 60-135mpa |
| Elongation | As demand |
Applications:
Deep drawing cookware,spinning cookware,road sign,Building Material,Insulation,and so on.
Competitive Advantage:
1. Factory direct sells, with competitive price.
2. Quick delivery time, according to the clinet's demand
3. Expert in producing cold rolled and hot rolled aluminium circles
4. Can supply small trial orders
5. Many years producing technology to supply high quality products
6. Quick reply on the customer's questions
