Home Companies HENAN HOBE METAL MATERIALS CO.,LTD.

Traffic Signs 3000 Series Round Aluminum Sheet Lightweight 1.0mm x 350mm DC

Contact Us

[China]

Trade Verify

Address: No. 521-15, 5th Floor, Shili Building, Hongzhuan Road, Jinshui Area, Zhengzhou, Henan, China

Contact name:Wang

HENAN HOBE METAL MATERIALS CO.,LTD.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Traffic Signs 3000 Series Round Aluminum Sheet Lightweight 1.0mm x 350mm DC

Country/Region	china
City & Province	zhengzhou henan
Categories	Aluminum Sheets

Product Details

Traffic Signs 3000 Series Round Aluminum Sheet Lightweight 1.0mm x 350mm DC

Quick Detal:

Our company stocks a full range of aluminum circles in several alloys,
such as 1050 1060 1070 1100 1200 3003 3004 3105 6061 6063 8011 etc.
Diameter from 100mm to 900mm, thickness from 0.5mm to 3.0mm are available.

Description:

Traffic signs or road signs are signs erected at the side of roads to provide information to road users. With traffic volumes increasing over the last eight decades, many countries have adopted pictorial signs or otherwise simplified and standardized their signs to facilitate international travel where language differences would create barriers, and in general to help enhance traffic safety.

Our Aluminium Circle Plate is currently being used to make:
Regulatory signs
Warning signs
Guide signs
Street signs
Route markersigns
Expresswaysigns
Freewaysigns
Welcome Signs
Informational signs
Recreation and cultural interest signs
Emergency management(civil defense) signs
Temporary traffic control (construction or work zone) signs
Schoolsigns
Railroad and light rail signs
Bicycle signs

Chemical composition limits

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Total Other	Al
3003	0.6	0.7	0.05-0.20	1.0-1.5	---	---	0.10	---	0.15	Remainder
3004	030	0.7	0.25	1.0-1.5	0.8-1.3	---	0.25	---	0.15	Remainder
3005	0.6	0.7	0.30	1.0-1.5	0.2-0.6	0.10	0.25	0.10	0.15	Remainder
3105	0.6	0.7	0.30	0.3-0.8	0.2-0.8	0.20	0.40	0.10	0.15	Remainder

Mechanical Property Limits

Alloy	Temper	Thickness/mm	Tensile Strength, Rm/MPa	Yield Strength, Rp0.2/MPa(min)	Elongation/%, A50mm
3003	O	>0.20--0.50	95--140	35	14
		> 0.50--1.50			18
		>1.50--3.00			20
		>3.00--6.00			23
	H12 or H22	>0.20--0.50	120--160	95
		> 0.50--1.50			4
		>1.50--3.00			5
		>3.00--6.00			6
	H14 or H24	>0.20--0.50	145--195	125	2
		> 0.50--1.50			2
		>1.50--3.00			3
		>3.00--6.00			4
	H16 or H26	>0.20--0.50	170--210	150	1
		> 0.50--1.50			2
		>1.50--4.00			2
	H18 or H28	>0.20--0.50	190		1
		> 0.50--1.50		170	2
		>1.50--4.00			2
3004	O	>0.20--0.50	155--200	60	14
		> 0.50--1.50			18
		>1.50--3.00			20
		>3.00--6.00			23
	H32 or H22	>0.20--0.50	190--240	145	4
		> 0.50--1.50			5
		>1.50--3.00			6
		>3.00--6.00			7
	H34 or H24	>0.20--0.50	220--265	170	3
		> 0.50--1.50			4
		>1.50--3.00			4
	H36 or H26	>0.20--0.50	240--285	190	3
		> 0.50--1.50			3
		>1.50--3.00			3
	H38 or H28	>0.20--0.50	260	220	2
	H38 or H28	> 0.50--1.50	260	220	3

Manufacturing Process

Aluminum Ingot/Master Alloys --- Aluminum Melting Furnace - --- Aluminum Slab --- Hot Rolling (Direct Cast)

Or Cold Rolling (Cold Cast) – Punching – Annealing Furnace -- Final Inspection – Packing --- Delivery

Cold Rolling Aluminum Circles are widely used in furnitures like tables. But most aluminum circles clients requested are Deep Drawing Quality Aluminum Circle. These aluminum circle are widely used in kitchenware, cookware, reflector-light etc.

Features

Wide range of selection on circles' size including customized shape and size;

Excellent deep drawing and spinning quality;

Bright surface, no scratch

Specifications:

Specification	Name: 3000 series aluminum sheet circle
	Alloy: 3003, 3004, 3005, 3105 etc.
	Temper: O, H12, H22, H32, H14, H24, H26, H18 etc.
	Thickness: 0.25-200mm
	Width: Up to 1800mm
	Length: Up to 6000mm
	Surface treatment: mill finished, anodized, embossed, PVC coated
Feature	Machinability: It is readily machined and is considered as having good machinability for the aluminum alloys,.
	Forming: It is readily formed by either conventional cold working or hot working.
	Welding: It is readily accomplished by means of conventional welding methods.
	Heat Treatment: It is a non-heat treatable alloy.
	Forging: It may be hot forged in the range of 950 F to 500 F.
	Hot Working: The hot working range (as for forging) is 950 F to 500 F. In that range the alloy is easily hot worked.
	Cold Working: It is readily cold worked by all conventional methods.
	Annealing: Annealing, during or following cold working, is done at 775 F, allowing adequate time for thorough heating, followed by air cooling.
	Hardening: Hardens as a result of cold working only.
Application	Chemical equipment, ductwork, and in general sheet metal work, cooking utensils, pressure vessels, builder's hardware, eyelet stock, ice cube trays, garage doors, awning slats, refrigerator panels, gas lines, gasoline tanks, heat exchangers, drawn and spun parts, and storage tanks etc.
Alloy	Chemical Component %≤
	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	others		Al
										single	total
3003	0.6	0.7	0.05-0.20	1.0-1.5				0.1		0.05	0.15	remainder
3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3			0.25		0.05	0.15	remainder
3005	0.6	0.7	0.3	1.0-1.5	0.2-0.6	0.1		0.25	0.1	0.05	0.15	remainder
3105	0.6	0.7	0.3	0.3-0.8	0.2-0.8	0.2		0.4	0.1	0.05	0.15	remainder