Sand Blast Anodizing Grey Aluminum CNC Machine Parts For Mechanical
Hand
Quick Detail
| Raw Material | AL6061 |
| Custom Service | Yes, OEM/ODM Service |
| Quality System | ISO9001:2015 |
| Processing Technology | Cutting/Wood machining/CNC/Riveting |
| Surface treatment | Anodizing grey |
| Packing Way | Blister packaging or special packing you would like |
| Application Scenario | Mechanical Hand |
| MOQ Request | 100/500/1000 |
Description
This CNC Machining Part is based aluminum profile
6061 material to processing, first of all, we check the raw
material dimension is fine or not, the second is that according to
the drawing, use the CNC Gear shovel machine to do the
dimension, the third is that accroding to the drawing, uthe forth
is that use the CNC to do exact dimension, the fifth is do
anodizing , the last step is riveting, and then
inspection/packing. First inspection and patrol inspection are
done in processing .
Note
What are the benefits of CNC precision parts processing?
- Multi-axis control and multi-axis linkage: The commonly used
machining centers are mostly three-axis linkage. By increasing the
swing angle and increasing the rotation coordinates, it can form
four-axis linkage, five-axis linkage, seven-axis linkage, and even
more-axis linkage processing. center.
- Parallel machine tools: The functions of commonly used machining
centers are relatively fixed. Vertical machining centers,
horizontal machining centers, or machining centers, turning
centers, etc. are combined to form a machining system, which
increases the machining range and processing capacity of the
machine tool.
- Tool breakage alarm: use infrared, acoustic emission, laser and
other detection methods to detect the tool. If tools are found to
be worn or damaged, promptly alarm, automatically compensate or
replace spare tools to ensure product quality.
- Tool life management: unified management of multiple blades on a
tool, or several tools working at the same time, to improve
processing efficiency.
- Automatic protection of machine tool overload: The machine tool can
automatically protect the machine tool according to the load during
processing. When the load exceeds the maximum load set by the
machine tool, the machine tool will automatically shut down. The
load size can be set and changed by yourself.
- Machining dynamic entity simulation: During the machining process,
the machining state of certain parts of the machine tool is not
easy to observe. If the dynamic entity simulation function is
added, the machining state of the workpiece can be observed at any
time, which can prevent undesirable phenomena in machining, such as
Knife, over-cutting, not only, unreasonable steps, etc.
- On-line inspection of workpieces: also called real-time inspection,
which means real-time inspection of workpieces in the process of
processing to find and correct errors in time. This function can
effectively avoid the problem of re-clamping and positioning caused
by unqualified inspection after conventional processing, shortening
production time and improving production efficiency.
- Adaptive control: The machine tool with this function can detect
the changes in the cutting conditions (such as cutting force,
temperature, etc.) that it senses during the machining process, and
control the machine tool to change the cutting amount in time
through the adaptive control system, so that the machine tool and
the tool are always Maintain the best condition, so as to obtain
higher cutting efficiency and processing quality, and extend the
service life of the tool.
We can offer CNC machining partd for custom design.
