Dongguan Fodor Technology Co., Ltd |
Verified Suppliers
|
|
Copper Precision Drilling And Milling CNC Machining Parts For Nut
Quick Detail
Raw Material | Copper |
Custom Service | Yes, OEM/ODM Service |
Quality System | ISO9001:2015 |
Processing Technology | Cutting/Wood machining/CNC/Riveting |
Surface treatment | clean |
Packing Way | Blister packaging or special packing you would like |
Application Scenario | Nut |
MOQ Request | 100/500/1000 |
Description
This CNC Machining Part is based aluminum profile 6061 material to processing, first of all, we check the raw material dimension is fine or not, the second is that according to the drawing, use the CNC Gear shovel machine to do the dimension, the third is that accroding to the drawing, uthe forth is that use the CNC to do exact dimension, the fifth is do anodizing , the last step is riveting, and then inspection/packing. First inspection and patrol inspection are done in processing .
Note
What should we pay attention to when machining CNC precision parts?
1. The CNC lathe processor must read the content of the process
card clearly before processing, clearly know the part, shape,
drawing and size of the workpiece to be processed, and know the
processing content of the next process.
2. Before the workpiece is clamped, the size of the blank should be measured whether it meets the requirements of the drawing. When the workpiece is clamped, it must be carefully checked whether its placement is consistent with the programming operation guide.
3. Finish machining only after rough machining self-inspection. After finishing processing, workers should conduct self-inspection on the shape and size of the processed parts: check the basic length and width dimensions of the processed parts on the vertical surface; measure the basic point size marked on the drawing for the processed parts of the inclined surface.
4. After the worker completes the self-inspection of the workpiece and confirms that it is in compliance with the drawings and process requirements, the workpiece can be removed and sent to the inspector for special inspection.
What are the benefits of CNC precision parts processing?
1. Multi-axis control and multi-axis linkage: The commonly used
machining centers are mostly three-axis linkage. By increasing the
swing angle and increasing the rotation coordinates, it can form
four-axis linkage, five-axis linkage, seven-axis linkage, and even
more-axis linkage processing. center.
2. Parallel machine tools: The functions of commonly used machining
centers are relatively fixed. Vertical machining centers,
horizontal machining centers, or machining centers, turning
centers, etc. are combined to form a machining system, which
increases the machining range and processing capacity of the
machine tool.
3. Tool breakage alarm: use infrared, acoustic emission, laser and
other detection methods to detect the tool. If tools are found to
be worn or damaged, promptly alarm, automatically compensate or
replace spare tools to ensure product quality.
4. Tool life management: unified management of multiple blades on a
tool, or several tools working at the same time, to improve
processing efficiency.
5. Automatic protection of machine tool overload: The machine tool
can automatically protect the machine tool according to the load
during processing. When the load exceeds the maximum load set by
the machine tool, the machine tool will automatically shut down.
The load size can be set and changed by yourself.
6. Machining dynamic entity simulation: During the machining
process, the machining state of certain parts of the machine tool
is not easy to observe. If the dynamic entity simulation function
is added, the machining state of the workpiece can be observed at
any time, which can prevent undesirable phenomena in machining,
such as Knife, over-cutting, not only, unreasonable steps, etc.
7. On-line inspection of workpieces: also called real-time
inspection, which means real-time inspection of workpieces in the
process of processing to find and correct errors in time. This
function can effectively avoid the problem of re-clamping and
positioning caused by unqualified inspection after conventional
processing, shortening production time and improving production
efficiency.
8. Adaptive control: The machine tool with this function can detect
the changes in the cutting conditions (such as cutting force,
temperature, etc.) that it senses during the machining process, and
control the machine tool to change the cutting amount in time
through the adaptive control system, so that the machine tool and
the tool are always Maintain the best condition, so as to obtain
higher cutting efficiency and processing quality, and extend the
service life of the tool.
We can offer CNC machining partd for custom design.