|
[China]
Trade Verify
Address: China Factory : Suzhou Industrial Park, JiangSu Province,China
Contact name:amy
BEST PIPELINE EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
The pipes are manufactured with the diameters between 17,2 – 2020 mm and with the wall thickness of up to 17,5 mm as spiral or longitudinal welded pipes. For pipes with larger diameters, it is permitted to construct them of more than one section (circumferential seam)
| Steel grades used | P195TR1, P235TR1, P265TR2 P195TR2, P235TR2, P265TR2 |
| Dimensions and tolerances | For the outside diameter D219,1 D +/-0,75 % or +/- 6 mm depending on which value is greater. The tolerances applied to wall thickness depend on the wall T For T5 +/-8 % or 2 mm (depending on which value is greater) |
| Pipe lengths | Pipes with precise lengths are manufactured with the following tolerance values: for D406,4- for pipes 0- 6m -0/+25%- for pipes 6-12m -0/+50%- for pipes longer than 12m -0/to be negotiated |
| Tightness | Pipes should be subject to water testing (7Mpa) or electromagnetic testing. |
| Straightness | < 0,0015 of pipe length (below 3mm per every meter of pipe length) |
| Tests | Mandatory tests: ladle analysis, tensile testing, transverse
tensile testing of the weld > 508, tightness testing, dimension
verification, visual inspection, NDT of the weld Optional tests: transverse tensile testing of the weld D= 219,1- 508, wall thickness measurement at a distance from pipe ends |
PN-EN 10217-1 Welded steel tubes Pictures
