Home Companies Dome Metals Co., Ltd.

0.3mm Magnesium Alloy Plate Aluminum Sheet For Boat Car

Active Member

Contact Us

[China]

Address: No. 1394, hanghai East Road, Zhengzhou area (Jingkai), Henan pilot Free Trade Zone,China

Contact name:Linda

Dome Metals Co., Ltd.

0.3mm Magnesium Alloy Plate Aluminum Sheet For Boat Car

Country/Region	china
City & Province	zhengzhou henan
Categories	Aluminum Sheets

Product Details

Magnesium Alloy Plate Chinese Supplier Magnesium Aluminum Sheet For Boat Car

Introduction of Magnesium Alloy Plate:

The heat dissipation of the magnesium alloy has an advantage of the alloy, and the heat sink (temperature) magnesium alloy produced by a heat source is easier than aluminum alloy than the aluminum alloy. The speed, the top is easier to achieve high temperature. That is, the temperature difference between the radiator of the aluminum alloy material and the top temperature is small than the radiator of the magnesium alloy material. This means that the air temperature of the heat sink root produced by the magnesium alloy material is poor, the heat sink made of the aluminum alloy material is large, so that the diffusion convection of the internal air inner air inside the radiator is accelerated to increase the heat dissipation efficiency. Therefore, the same temperature, the heat dissipation time of the magnesium alloy does not need half of the aluminum alloy.

Details of Magnesium Alloy Plate:

Type	Mg	Al	Zn	Mn	Si	Fe	Cu
AX31B	Bal.	2.5-3.5	0.60-1.4	0.20-1.0	≤0.08	≤0.003	≤0.001
AZ61A	Bal.	5.8-7.2	0.40-1.5	0.15-0.50	≤0.10	≤0.005	≤0.005
AZ80A	Bal.	7.8-9.2	0.20-0.80	0.12-0.50	≤0.10	≤0.005	≤0.005
AZ91D	Bal.	8.5-9.5	0.45-0.90	0.17-0.40	≤0.08	≤0.004	≤0.001

Features of Magnesium Alloy Plate:

1. Small density, magnesium metal is a widely used metal medium-specific metal, calculated according to ρ = 1.8 g / cm3, and magnesium alloy is 20% lower than plastic, 30% less than aluminum.

2. High strength, the strength and mass ratio of magnesium alloys, has a bearing capacity.

3. Good heat dissipation performance, suitable for heat dissipation requirements. The thermal conductivity is 100 times the PP material.

4. Small elastic modulus, good rigidity, long-term use is not easy to deform, and strong earthquake resistance.

5. Anti-electromagnetic interference, good electromagnetic shieldability.

6. The color is bright and beautiful, corrosion resistant, can maintain the quality of the appearance for a long time.

7. It is an environmentally friendly material that can be recycled.

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, picking or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry,Construction material, Kitchen utensils.
BA	Those processed with bright heat treament after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building construction.
NO.1	The surface finished by heat treament and picking or processes corresponding there to after hot rolling.	Chemical tank, pipe.