Active Member
|
[China]
Address: No. 1394, hanghai East Road, Zhengzhou area (Jingkai), Henan pilot Free Trade Zone,China
Contact name:Linda
Dome Metals Co., Ltd. |
|
|
UK Standard ZK60 WE43 Magnesium Sheets, Magnesium Alloy Plate
Specifications:
◇ Light weight. Magnesium metal is the lightest metal material in
the world .
◇ High specific strength .magnesium alloy has a high strength and
quality ,it also has a certain bearing capacity.
◇ Small modulus of elasticity. has better strength and anti-seismic
and not easily distortion .
◇ Good anti electromagnetic interference and shield .
◇ Non pollution and recycle.
◇ Stable dimensionally and easy processing .
Chemical Composition:
| Model | Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Other | |
| Single | Total | |||||||||||||
| AZ31B | Bal. | 2.5-3.5 | 0.6-1.4 | 0.2-1.0 | - | - | ≦0.08 | ≦0.003 | ≦0.04 | ≦0.01 | ≦0.001 | - | ≦0.05 | ≦0.30 |
| AZ91D | Bal. | 8.5-9.5 | 0.45-0.90 | 0.17-0.40 | - | - | ≦0.08 | ≦0.004 | - | ≦0.025 | ≦0.001 | 0.0005-0.003 | ≦0.01 | - |
| AZ61 | Bal. | 5.5-7.0 | 0.5-1.5 | 0.15-0.50 | - | - | ≦0.10 | ≦0.05 | - | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| AZ80 | Bal. | 7.8-9.2 | 0.2-0.8 | 0.12-0.50 | - | - | ≦0.10 | ≦0.005 | - | ≦0.05 | ≦0.005 | - | - | ≦0.30 |
| ZK61M | Bal. | ≦0.05 | 5.0-6.0 | ≦0.10 | - | 0.3-0.9 | ≦0.05 | ≦0.05 | - | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| ME20M | Bal. | ≦0.20 | ≦0.30 | 1.3-2.2 | 0.15-0.35 | - | ≦0.10 | ≦0.05 | - | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.30 |
Usage
Due to its good specifications , AZ31B magnesium alloy can be used
in all kinds of field.
1, Magnesium alloy thick plate are used to make satellites ,lunar
landing aircraft bases ,exterior panel of missile and rocket and
the empennage of missile and plane.
2, Magnesium alloy middle board are used to make the auxiliary tank
,side board and other structure of battleplane.
3, Cast sheet of magnesium alloy:
1) The magnesium alloy are used on the train for vibration
attenuation,seat and couchette framework lining board and goods
shelf.
2) The wide width usually requests between 1200-1800mm,and
thickness between 1 and 1.5mm on cars’ front and rear panels ,door
panels .
3) The shell of 3C product , computer ,mobile hard disk ,CD,
camea,acoustics,cell phone.
4) Magnesium etching has replaced copper plate in printing and
printing plate industry, and average thickness of the plate is 5mm.
5) Magnesium has been continuously used in electric tool and sport
equipment .
Magnesium Alloy Plate Picture show:
