Cashmere Loose Fiber Dyeing Machine 50KG 1: 5 Low Liquor Ratio

Super Environmental Low Liquor Ratio: 1:5-10 Loose Fibre Dyeing Machine For Cashmere Proportional Heating

It is suitable for dealing with coloration of loose fiber such as cotton,wool and acrylic etc .

Once be packed, it could finish several dyeing processes such as refining, bleaching, dyeing and pliability etc.

The main power is reduced greatly because of the horizontal circulating pump is low energy and high-performance and the impeller of circulating pump is designed especially.

Loose stock fiber’s ingress and egress are more secure and convenient because the machine’s cage can be hoisted out directly and also can be used the chain hanging bracket of bottom model.

New structure and low liquor ratio about 1:5-8

Equipped with longer casing pipes, the dye load adjustment range is large.

Heat exchanger is high efficiency.

Specification

Technical Data

Maximum work temperature:98℃

Temperature accelerating rate:25℃-98℃About 4℃/minute

Standard structure:

Main body of dyeing machine 1set

Dosing tank 1set

Heat Exchanger 1set

Dead weight balancing device 1set

Safety interlock device 1set

Main Pump 1set

Base Frame 1set

Valve group components 1set

Carrier 1set

Main Electrical Cabinet 1set

Technical parameter and configuration

• The machine main body is made by SUS316L,Thickness is 3mm,The thickness of the bottom head is 4mm, the machine cover the other parts material is SUS304
• Water pump:Upside-down new high-efficiency energy-saving uranium flow pump, equipped with waterproof device,Motor:Wannan, Bearing:SKF

3. Valves: Stainless steel angle seat valve, three inlets and three outlets, proportional heating (SMC), equipped with direct heating valve, steam trap (original Spirax Sarco) and equipped with manual bypass valve

4. Electrical part:

①. Motor forward and reverse

②. Button and contactor brand: Schneider, main tank water level indicator:DANFOSS, dosing tank water level indicator:DANFOSS (bubble type)

③. Inverter: V&T, PLC: Mitsubishi, computer: AS787, built-in spring tube heat exchanger (316L)

5. Each machine equip with one set fiber dyeing carrier (material 316L)

6. The thickness of the dosing tank is 2mm (material 316L), with a cover, a water-retaining strip on the inside of the cover, and an elongated tube along the bottom to form a drip ring.