Beijing Silk Road Enterprise Management Services Co.,LTD |
Verified Suppliers
|
HZ-JB450 Slitting Machine Plate Thickness 0.2-2.0mm Plate Width
100-400mm Steel Slitting Line
1. Main usage
It is used to slit the steel coil to the rated width. It could cut
different kinds of metal coils with different blades and prepare
the billet for next process ( such as rolling, welding pipe, cold
bending and punching).
2. Technical process ( including the process drawing)
Stuff preparing
—stuff loading—stuff uncoiling—draw pinching-—front loop rack (
loop pit)—transition rolling platform—slitting line main
machine—transition stuff guiding platform(edge wire pit)—edge wire
coiler—back loop splint ( loop pit)—pre-sub/pressing materials
tension damping device—pinching—coiler—unloading—production
packing.
3. Equipment technical parameter confirmation letter
Specification(raw material):
12 lines(thickness 2.01mm-3.0mm)
8 lines(thickness 3.01mm-4.0mm)
6 lines(thickness 4.01mm-5.0mm)
Narrowest production: 60mm(thickness 1.2mm-5.0mm
One side sliver width:≥3.0mm(thickness 1.2mm-3.0mm)
≥thickness of the plate(thickness≥3.0mm)
Two sides should have 2 slivers
4. Equipment configuration
,Equipment composition:
Other parameters:
Main components drive motor:
Loading
trolley
2.2KW 1set
Uncoiler
4KW
1set
Traction pinch initial correction machine
22KW 1set
Slitting host
machine
90KW
1set
Upper horizontal shaft pressing motor
2.2KW
1set
Sliver rolling machine (one for each
side)
15KW 2sets
Rolling host
machine
200KW 1set
Unloading
trolley
2.2KW 1set
Hydraulic
Station
11KW 1set
loading machine capacity:about 380KW
Stuff stacking rack
1. It is used to stack stuff in order to leed and transport the
stuff.
2. it is welded by steel plate with V shape
3.Max bearing weight: 25T
Stuff scope: width 900mm-1500mm
Hydraulic pressure loading trolley:
Automatic hydraulic pressure driving feeding machine,
leading terminal and shoveling terminal:
3.production description
The series production line is used for the metal plate decoiling,slitting and winding into several volimes needed width coil plate.suitable for processing of cold rolled and hot rolled carbon steel,silicon steel,tinplate,stainless steel and the syrface of all kinds of metal plate after plating.the slitting line PLC control,human-machine interface,according to a high degree of automation,simple operation and reliable.
condition | new |
model | HZ-JB450 |
plate thickness | 0.2-2.0mm |
plate width | 100-400mm |
plate weight | 3T |
slitting speed | 0-100m/min |
capacity | 50KW |
installation size | 13*4m |