1 | Model | XC6000 |
2 | Truck Dimensions | Overall Length | 9,460mm |
| | Overall Width | 2,500mm |
| | Overall Height | 3,800mm |
3 | Truck Cab & Chassis | Brand | ISUZU |
| | Model | QL1180XQFRY |
| | Drive Type | 4X2 |
| | Chassis Curb Weight | 7,300kg |
| | Max. GVW | 18,000kg |
| | Wheel Base | 5,550mm |
| | Max. Speed | 90km/h |
| | Driver Cabin Capacity | 1 driver + 2 passengers |
| | Engine | - Model: ISUZU 6HK1-TCL
- Type: 6-cyilinder, water cooling, turbo charged and intercooled
- Displacement: 7790ml
- Rated Power and rotate speed: 177kw/2400rpm
- Maximum torque speed: 706NM/1450rpm
- Emission standard: Chinese V
|
| | Transmission | - Model: ISUZU MLD-6Q
- Type: manual transmission with 6 forward and 1 reverse gears
|
| | Air Conditioning (driver cabin) | Cooling capacity 5.7kw |
| | Steering | Hydraulic power steering |
| | Tire | - Type: 295/80R22.5 16PR, 11.00R20 16PR
- Number: 6
|
| | Fuel Tank | 150L |
4 | Vanbody | Kitchen Dock Height | 1450±50mm onwards |
| | Payload | 4,000kg |
| | Vanbody Dimensions | - Overall external Length: 7,500mm
- Overall external Width: 2,500mm
- Overall external Height: 2,400mm
|
| | Doors | - Type: Front and rear Insulated sliding Doors
- Dimensions: length 1,900mm, width 1,100mm
|
| | Walls & Roof | - Rigid press injected CFC polyurethane foam sandwich panels (80 -100
mm). One piece panels are full-width/full-height & full- length
panels manufactured under high pressure in a special autoclave with
metal plates inserted in between
- Internal and external faces are covered with white smooth board
|
| | Floor | - The floor thickness is approx. 108mm
- Has an impact resistance of up to 7kg/cm2
- The floor material isnon slip aluminum plate, machine welded to
enhance consistency and reliability.
|
5 | Platform | Type | Working platform and 4-way operation platform |
| | Dimensions | - Working platform (L×W): 1,400mm×2,380mm
- 4-way operation platform (L×W): 1,100mm×1,100mm
|
| | Payload | - Working platform: 1,000kg
- 4-way operation platform: 400kg
|
| | 4-way side shift | 800mm |
| | 4-way max. extension | 600mm |
| | Min. Servicing Height | 2,800±50mm |
| | Max. Servicing Height | 6,100±50mm |
| | Safety Handrails | 900mm high extendable tubular steel protective handrails mounted at
platform sides, handrails extend to leading edge of platform |
| | Others | - Platform operation is powered by advance systems allowing piston,
auxiliary & hand pump to drive the platform
- 25mm Non-slip aluminum alloy profiles floor surface
- Non-marking rubber bumper mounted at leading edge of platform
- Control panel for vanbody and platform is fitted into the internal
of vanbody and waterproof
- Fixed canopy
|
6 | Refrigeration System (vanbody) | | - Model: CARRIER 850U
- System is equipped with cable and socket to connect the external
electric supply
|
7 | Hydraulic System | Max. Work Pressure | 14Mpa |
| | Hydraulic Oil Tank | 125L |
| | Gear Pump | - Rated power: 23Mpa
- Displacement: 45ml/r
- Brand: CASAPPA
|
| | Manual Emergency Pump | - Rated power: 22Mpa
- Displacement: 45ml per time
- Brand: Hipo
|
| | Electric Emergency Pump | - Rated power: 13Mpa
- Displacement: 4.3L/min
- Max. Duration: 2min
|
| | Cylinder | Twin telescopic chrome plated lift cylinders. |
| | Functions | - All hydraulic operations are easy accessible at ground level
including vanbody up/down, stabilizers up/down, platform
left/right, platform in/out, etc.
- Internal emergency power allows retraction of all hydraulic
cylinders without acceleration of the truck engine.
- In the event of failure of the hydraulic systems, all functions can
be controlled via the manual emergency pump.
- Velocity fuses mounted at each cylinder to halt rapid descent of
hoist in the event of a sudden system pressure loss. Pilot operated
check valves have to be mounted onto the cylinder.
|
8 | Electric System | Voltage | 24V |
| | Battery | 2 units, 12V/115Ah |
| | Light System | - Four flash LED lights to be fixed at the 4 bottom corners of the
van body
- Amber flashing warning light mounted at center of van body roof.
- Back-up spotlight mounted at rear of chasiss.
- headlights and clearance lights
- Eight (8) LED lights for van body interior are mounted flush to the
van body ceiling to avoid damages during loading & unloading.
|
| | Safety Features | - Interlock to prevent raising the van body or extending the
stabilizers unless transmission is in neutral and parking brake
- Van body cannot be raised above platform height from driver control
panel
- Van body cannot be raised above the (1700mm) unless the stabilizers
are fully extended.
- Stabilizers cannot be retracted unless van body is fully lowered.
- Left Front stabilizer (nearest driver cabin) is the last to fully
retract, providing the operator with a visual indication that all
stabilizers are fully retracted.
- Warning light on dash to indicate van body is raised.
- Warning light on dash to indicated stabilizers are extended
- Engine starter protection to prevent the starter from being engaged
while the engine is running
- The truck is equipped with an automatic sound alarm (buzzer)
activatedduring each of the following operation with different
tone: Reversing of the truck; Raising and lowering of the van body;
Extend and retract of stabilizers.
- When engine stop function is activated, non-essential electrical
devices is disconnected form their power source to conserve battery
power.
- Engine stops if transmission is being engaged while stabilizers are
not fully retracted.
- Retraction of stabilizers is only possible if the van body is fully
down.
- The vehicle cannot move when the PTO is engaged.
- Warning flash light to be fixed to the nearest point of each
Stabilizer and should flash whenever stabilizer are extended or
retracted.
|
9 | Painting | Chassis cab, platform and van body | White RAL 9003 |
| | Chassis frame and mounted equipment | Black |
| | Stabilizers | Red |
| | Main cylinders | Black |
| | Platform cylinders | White |
| | Customized paiting & logo decoration | Included |