Home Companies Shenzhen Seals Instrumentation Co., Ltd.

0.4MPA 1Pa Vacuum Leak Tester IP Test 0.95RH For Electric Toothbrush

Active Member

Contact Us

[China]

Address: 3/F,block B, shifeng indusrtial park, gongming north ring avenue, guangming district, shenzhen

Contact name:Echo

Shenzhen Seals Instrumentation Co., Ltd.

0.4MPA 1Pa Vacuum Leak Tester IP Test 0.95RH For Electric Toothbrush

Country/Region	china
City & Province	shenzhen
Categories	Electronics Production Machinery

Product Details

Vacuum Leak Tester IP Test Machine for Electric Toothbrush

Product Paramenters

Item	Testing Machine
Test medium	Compressed air or specified medium by customers
Gas source	0.4-0.8MPA (clean, dry)
Power supply	AC220V(±15%),50HZ,ground lead
Environmental temperature	0-50℃
Environmental humidity	≤95% (not dew)
Pressure adjustment range	-20kPa~150kPa
Number of test ports	1
Status of the tested product	With or without hole, semi finished or finished product
Pressure mode	Positive and negative pressure
Pressure adjustment precision	0.05%F.S
Measurement range of the senor	-20kPa~150kPa
Measurement range precision of the senor	0.02%FS
Pressure minimum setting unit	1Pa
Resolution ratio	1Pa
Dimension	335305285
Gross weight	11KG

The SLA direct pressure leak detector is mainly used for test of the semi-automatic or fully automatic leak with the dry compressed air as a medium, inflating the tested parts with the possitive pressure(or negative pressure), and determines whether the filled gas has leak. When verifying, the compressed air source is cutting off, if the air within the tested products leaks, the test pressure will inevitably change. What we need to test is this variation in pressure. By calculation of the

pressure change of the tested object, we achieve the good or bad judgment of the tested products on the production line.