Commercial 300L Dc Inverter Heat Pump Water Heater 24A

Features of Watermark Water Tank 300l Air Source Heat Pump Hot Water Heater

The air source heat pump hot water system consists of an air source heat pump unit, a hot water storage tank, a water pump, and pipelines. Hot water is circulated through the system to heat the water in the hot water storage tank, and then supplied to the user from the hot storage tank. The air source heat pump system can produce hot water alone, and is often used in solar energy systems as an auxiliary heat source for the system. System features The air source heat pump hot water system has changed the traditional heating element and fuel direct heating method, thereby eliminating potential safety hazards such as electricity leakage and air leakage, and has more excellent safety performance. The air source heat pump hot water system has a large water output and a stable water temperature, ensuring a sufficient supply of hot water for 24 hours, and high comfort. Using the air source heat pump hot water system, the power consumption is only a quarter of the electric heating, the energy saving effect is obvious, and the operating cost is very low. The air source heat pump hot water system just transfers the heat from the surrounding air to the water, completely achieving zero emission, green and environmentally friendly modular design, easy to install, and the principle of the system is that the compressor compresses the return low pressure refrigerant.

Modular control system reduces energy loss

The host provides moderate energy requirements according to the end, reducing unnecessary energy loss.

The main machine does not contain electricity auxiliary heat, energy saving

The host machine of all series products of Leomon heat pumps does not contain electricity and auxiliary heat, which saves unnecessary operation cost.

 Watermark Water Tank 300l Air Source Heat Pump Hot Water Heater

Closed refrigerant system, safe and stable

Fluorine refrigerant system leakage points, easy to lead to frequent leakage of refrigerant, reduce equipment performance and service life. Leomon heat pumps water machine system adhere to the international standard of closed refrigerant design, the unit in high or low temperature conditions also has excellent heat transfer efficiency.

Company introduction
20 years of professional heat pump system technology excellence
We give full play to the advantages of scientific and technical personnel, and constantly overcome the technical bottlenecks in the field of air energy water heater. We have obtained 120 invention patents, more than 350 other patents, and participated in the preparation of 25 national standards.

Our strong and professional technical and marketing team ready to make best service!

• Technical paremeters for Watermark Water Tank 300l Air Source Heat Pump Hot Water Heater

• Item KCHR-13I/BP Side wind) Rated voltage 220V~50Hz Cooling and heating Nominal cooling capacity 13kW(3kW-15kW) Nominal cooling power consumption 4.6KW Nominal cooling(COP) 2.82 IPLV 4.13 Nominal heating capacity 14kW(3.5kW-16kW) Nominal heating power consumption 4.5KW Heating Nominal heating capacity 10.5KW Nominal heating power consumption 2.65KW Nominal heating(COP) 3.96 Maximum operating current 33A Maximum power consumption 6.6KW Rated water flow 2.24m²/h Refrigerant/charge volume R410A/4000g noise ≤56dB(A) Water resistance ≤15kPa Maximum working pressure on low pressure/high pressure side 4.5Mpa/0.15Mpa Allowable working pressure on suction/exhaust side 4.5Mpa/0.15Mpa Anti-shock level I waterproof level IPX4 Unit size (l× w × h) 1030×410×1390(mm) (Cold and warm) Caliber of inlet and outlet DN32 (Hot water) Caliber DN25 Application area 100㎡

• Nominal refrigeration conditions: ambient dry bulb 35℃, outlet temperature 7℃. Nominal heating conditions: ambient dry bulb 7℃, ambient wet bulb 6℃,outlet temperature 45℃
• Nominal hot water production conditions: ambient dry bulb 20℃, ambient wet bulb 15℃, initial water temperature 15℃, end water temperature 55℃.
• 
•