Venlo Multi Span Polycarbonate Sheet Greenhouse Low Material Consumption

PC Sheet Venlo Multi Span Greenhouse Polycarbonate Sheet Greenhouse

Application

PC solar panels have good water resistance, and have been tested by the National Fireproof Construction Material Quality Supervision and Inspection Center. According to the GB8624-1997 standard, they have reached the level of flame retardant B1. In addition, the solar panels under strong flames will not promote the spread of the fire and the burning process. The medium sunlight board does not produce dense smoke and toxic gases, and automatically extinguishes after leaving the fire. This shows that the sunlight board has good flame retardancy and has been highly evaluated in several major fire prevention tests in advanced countries in the world.

PC board Venlo style multi-span greenhouse use:

Due to the large-span spire design, the Venlo-style multi-span greenhouse is generally used for large-scale sightseeing greenhouses, nursery greenhouses, flower markets, large shopping malls, or ecological restaurants, etc.

Advantages

1. Good insulation effect;

2. Obvious energy saving;

3. Good lighting;

4. Low material consumption;

5. Low cost.

Related systems

1. External shading system;

2. Internal shading system;

3. Thermal insulation system;

4. Natural ventilation system;

5. Fan wet curtain forced cooling system;

6. Micro fog cooling system;

7. Irrigation system;

8. CO2 supplement system;

9. Supplement light system;

10. Fertilization system;

11. Heating system;

12. Circulating fan system;

13. Seedbed system;

14. Computer semi-automatic and automatic control system;

15. Top spray system, etc.

Step

1.Install the outer solar panel:According to the deepening design layout position, a 20mm-thick outer layer with a suitable size is prepared for installation. After installation, the edges, longitudinal seams, and horizontal seams of the sun-board are installed in a line.

2.Install the inner solar panel:According to the position of the drawing, a 16mm solar panel with an appropriate inner layer is prepared for installation.When installing, the bottom of the upper panel should be cleaned with a white towel.At the same time, the upper surface of the inner solar panel should be cleaned before being installed to avoid inter-layer pollution. Unable to clean, affecting macro effect.

3.Glue and install bead:After fully checking the installation quality of the outer solar panel, install the outer solar panel, weather resistant adhesive, and then install special aluminum alloy beading. The distance and position of the screws for installing the bead must meet the requirements of the drawings.