1100mm * 1100mm * 400mm Ventilation Exhaust Fan For Industrial Poultry Greenhouse

Ventilation Exhaust Axial Cooling Fan Used in Industrial Poultry Greenhouse

Product Description

1. Impeller: cast aluminum alloy impeller.
2. Blade: 6 pieces, made of 430 / 304 stainless steel.
3. Frame: the frame is made of hot-dip galvanized plate with a thickness of 1.0mm,. Zinc coating 180g / m2.
4. Impeller bearing: permanently sealed bearing, size 633313.
5. Protective net: plastic sprayed steel wire, 2.8mm thick.
6. Tip clearance: 25 mm, mirror.
7. Collector: galvanized sheet, 1.0mm thick.

Application Program

The cooling of the wet curtain fan is based on the principle of water evaporation and cooling, using the relevant fans to achieve the purpose of cooling. This method is cheaper than air conditioning, but it must be equipped. Micro fog cooling refers to spraying water in the form of micro or 10 micron fog particles into the greenhouse, and then quickly evaporating. Use a large amount of water to evaporate latent heat, absorb a large amount of heat in the air, discharge the moist air out of the room, and achieve the purpose of cooling.

Advantage

1. Krupp Stainless steel blade, large air volume, no deformation, no damage, no dust, beautiful and durable.
2. High strength nylon swing drop hammer opening device ensures flexible shutter switch.
3. Type B belt, imported from Japan, with long service life.
4. Provide Siemens motor and famous motor in China.
5. Voltage and frequency can be customized.
6. The bell wheel of fan is made of high-strength aluminum magnesium alloy by die casting, which is light in weight and strong in corrosion resistance.
7. Sand blasting and special three stiffened pulley design, beautiful appearance, eliminate internal stress.

A: Without a weight, the fan is required to overcome the resistance caused by the gravity of the louver. The model with the same air volume and without a weight is more power-consuming. The model with the same power without a weight has a relatively small air volume. Hammer blower!

A: The louvers cannot be opened after the fan motor without the lever is turned off. After the motor is turned off in time, the louvers can be manually opened for natural ventilation. It is recommended that you choose the style with the lever!