Active Member
|
[China]
Address: Office Address: Building 4, No. 51 Jingbei 3rd Road, Jingkai Zone, Zhengzhou City. Henan Province,China.
Contact name:chen
Henan Lantian Medical Supplies Co.,Ltd. |
|
|
Restore all reagents to room temperature before testing. The test
needs to be carried out at room temperature.
1. Extract specimens (see Figure 1)
1. Add 400 in the sample extraction tube vertically μ L (about 10
drops) sample buffer, insert the sample into the solution, rotate
it about 10 times near the inner wall to dissolve the sample in the
solution. probably.
2. Flatten the sample chip along the inner wall of the extraction
tube, keep the liquid in the tube as much as possible, take out the
sample and discard it.
3. Cover the transmitter.
II. Test Procedure (See Figure 2)
1. Remove the test card from the sealed bag.
2. Put 2 drops (about 80 μ l) The treated sample extract is added
to the additional well of the test card and the timer starts.
3. Read the results of the test card after 15 minutes at room
temperature. After 20 minutes, the result was invalid.
① Invalid result: the quality management production line
(production line C) does not display the reaction production line,
and the test is invalid. It is necessary to repeat the experiment.
② Negative result: red ribbon, color of quality management line
(line C).
③ Positive result: two red bands, test line (t line) and quality
management line (C line) are represented in color.
