Active Member
|
[China]
Address: Building C21, No.2588,WuzhongRoad,Wuzhong economic development zone,Suzhou City
Contact name:Solar.Lv
Novtec Technology Co .,Ltd |
|
|
Throw Aerosol Fire Extinguishing Generator Or Throw Aerosol Generator
How does FireLess 100 portable thrown extinguisher to extinguish fires ?
The extinguishing agent of FireLess 100 portable thrown extinguisher is a solid aerosol-forming compound. when it works, it will release the hot condensed aerosol, an extinguishing medium consisting of finely divided solid particles, generally less than 10 microns in diameter, and gaseous matter. The solid aerosol-forming compound can generate sub-nanometer level aerosol particles with strong extinguishing ability through physical and chemical reaction. It can act in the fire extinguishing space by the method of three-dimensional total flooding, and the fire is extinguished by lowering the temperature of the flame, suppressing the combustion of free radicals, and dilute the concentration of oxygen.
The basic information of FireLess 100 Throw Aerosol Generator
| Product name | FireLess 100 Throw Aerosol Generator |
| Product brand | FireLess |
| Overall dimension | 240(diameter)X110(height) (handle excluded) |
| Device weight | 5.3Kg |
| Agent quantity | 2.8Kg |
| Extinguishing Application Density (g/m3) | 56 |
| Protected volume | ≤100m³ |
| Start-up delay | ≤19 |
| Discharge time | 10 |
| Thermal clearance | When 400℃≤0.14m When 200℃≤0.28m When 75℃≤0.75m |
| Service life | 10years |
| Color | red |
What is agent quantity?
Mass of solid aerosol-forming compound required to achieve the design application density within the protected volume within the specified discharge time.
What is thermal clearance?
The air distance between a condensed aerosol generator and any structure or components sensitive to the temperature developed by the generator.
What is extinguishing application density (g/m3)?
Minimum mass of a specific aerosol-forming compound per cubic meter of enclosure volume required to extinguish fire involving particular fuel under defined experimental conditions excluding any safety factor.
What is design application density (g/m3)?
Extinguishing application density, including a safety factor, required for system design purposes.
The operation of the fire extinguishing device
| 1.Looking for the fire point |
| 2.Make a inspection of the device before use it |
3.pull out the pin pull ring of device and try to throw the device into the fire field as close to the fire source as possible.
|
| 4.The fire fighters or other user need to wait patiently and watch the fire situation |
| 5.The rescue can be carried out until the fires are extinguished and the gas mask is needed |
The working state
