Active Member
|
[China]
Address: No.29 Xuema Road, Xueyan, Wujin District, 213169 Changzhou, Jiangsu
Contact name:Grace Dai
Changzhou ADV Heat Exchanger Co., Ltd |
|
|
Introduction
The advantage of air cooled condensers
| |
|---|---|
| Design software | Using the mature European design software, according to the actual demand accurate design of heat exchanger, can design the latest refrigerant CO2,R410A, R507A and special low temperature cold agent etc. |
| Heat exchange structure | Supported to the casing by means of a "flating-bed " system that avoids any kind of contact between the heat-exchange tubes and the supporting end plates,assuring a long life for the heat-exchange without leaks. Heat-exchange sections separated and independent for each fan. The standard fin spacing is 2.1mm,Fin pitch up to 12mm for low air pressure drop. |
| Condenser structure | Shape with flexible and changeable,--Flat-bed,W-Bank,V-Bank; Fan direction--blowing and sucking. Finned length up to 12m,Finned height up to 2.7m. |
| Heat Exchange Tube | Using copper content more than 99.9% of special effective teeth threaded pipe, increase the surface area of the tube, improve the thermal efficiency. |
| Casing | Using galvanized sheet case, spraying outdoor powder coatings, and after high temperature curing, high strength of corrosion resistance is strong, the standard color for RAL9003. |
| Fans | Low noise axial fans,with maintenance free motors in protection class IP 54,Internal motor protection with thermo contacts.With precise design, a leading solar or lunar halo forming mould processing, air volume is larger and more efficient. |
Diemension Figures
Quality Details
Purchasing Guide
You just need to tell us your specific requirements and environmental parameters so that we can make professional quotations accordingly.
Please advise:
| Simulation table for air cooling | |||||||||||
| Cooler Size | |||||||||||
| Overall Size (L*W*H) | Plate Thickness | Plate Material | Fin Thickness | Fin QTY | Fin Material | ||||||
| Heat source parameters | |||||||||||
| Heat dissipation power | Heat Source Overall Size | Heat Source Locations and relative dimensions for installation holes ( drawings are better) | Ambient Temp. | Max. Temperature on Water Cooling Plate Surface | |||||||
| Fan parameters | |||||||||||
| Fan Size | Fan QTY | Fan Location | Wind volume curve | Suction or Blow | Wind pressure and pressure Drop | ||||||
Please be free to contact us if you need any further information, thank you!
