IDT72211L25J EMMC Memory Chip Synchronous FIFO 4.5K 512 x 9 40MHz 15ns 32-PLCC 14x11.46

IDT72211L25J Synchronous FIFO 4.5K (512 x 9) 40MHz 15ns 32-PLCC (14x11.46)

IC FIFO SYNC 512X9 15NS 32PLCC

Specifications of IDT72211L25J

 
Features of IDT72211L25J

• 64 x 9-bit organization (IDT72421)
• 256 x 9-bit organization (IDT72201)
• 512 x 9-bit organization (IDT72211)
• 1,024 x 9-bit organization (IDT72221)
• 2,048 x 9-bit organization (IDT72231)
• 4,096 x 9-bit organization (IDT72241)
• 8,192 x 9-bit organization (IDT72251)
• 10 ns read/write cycle time
• Read and Write Clocks can be independent
• Dual-Ported zero fall-through time architecture
• Empty and Full Flags signal FIFO status
• Programmable Almost-Empty and Almost-Full flags can be set to any depth
• Programmable Almost-Empty and Almost-Full flags default to Empty+7, and Full-7, respectively
• Output enable puts output data bus in high-impedance state
• Advanced submicron CMOS technology
• Available in the 32-pin plastic leaded chip carrier (PLCC) and 32-pin Thin Quad Flat Pack (TQFP)
• For through-hole product please see the IDT72420/72200/72210/72220/72230/72240 data sheet
• Industrial temperature range (–40°C to +85°C) is available
• Green parts available, see ordering information

Descriptions of IDT72211L25J

The IDT72421/72201/72211/72221/72231/72241/72251 SyncFIFO™ are very high-speed, low-power First-In, First-Out (FIFO) memories with clocked read and write controls.

Environmental & Export Classifications of IDT72211L25J