Active Member
|
[China]
Address: Rm. 1501-1502, Borun Science & Technology Park, No.2 Gaopeng East Rd, Chengdu Hi-Tech Zone, Sichuan, China, 641000
Contact name:Alice
Chengdu MRJ-Laser Technology Co., Ltd. |
|
|
Product Introduction
♦ This laser cleaning machine is a kind of rust remover tool which is widely used in cleaning of industrial equipment, different kinds of metal moulds, exterior wall of constructions etc. Depending on the wide uses of laser and development of relative applicable technologies development, laser cleaning becomes a revolutionary and green cleaning method.
♦ With the application of laser cleaning, there is no need to use any chemical agents and cleaning liquids. The waste is basically a small volume of solid powders, which are easy to store, can be recycled by adsorption. The waste has a light chemical reaction, will not produce noise and environmental pollution, and not harm the operator's health.
♦ With several machines combined, it's easy to achieve automatic control and remote control cleaning.
Product Features
1. The first laser cleaning machine with high quality fiber laser
in China.
2. Substrate non-contact cleaning, without damage.
3. High precision cleaning, good precision of position
cleaning,selective washing.
4. Without any chemical cleaning fluid and no consume of
materials,safe and environment protecting.
5. Simple operation, hand-hold clean or with a mechanical hand to
clean .
6. Good cleaning effect and save time.
7. Laser cleaning system is stability, almost no maintenance.
Technical Parameters
| Model | MRJ-FLC-200B | |||||
| Laser Power | 120W | |||||
| Laser Wavelength | Fiber Laser 1064nm | |||||
| Pulse Energy | 1.5mJ | |||||
| Focal Length | F=160mm / F=254mm(Customizable) | |||||
| Clean Head Weight | 2.5±0.1kg | |||||
| Touch Screen | 7 inch | |||||
| Cable Length | 3.0m(Customizable, up to 20m) | |||||
| Scan Length | 1-100mm(Customizable) | |||||
| Scan Width | 1-20mm(Customizable) | |||||
| Working Temperature | 0℃-50℃ | |||||
| Storage Temperature | ﹣10 to﹢60℃ | |||||
| Operating Humidity | 10% to 90% | |||||
| Machine Weight | 48±0.5kg | |||||
| Machine Size | 670*436*865mm | |||||
| Cooling Method | Air Cooling | |||||
| Power Consumption | 1200W | |||||
| Input Power | Single-phase 220VAC ± 10%, 50-60Hz | |||||
| Optional Accessory | Hand-held / Automated | |||||
Product Advantages
• Higher cleaning efficiency
• More uniform cleaning surface
• No damage to material substrate
Comparison between Different Cleaning Methods
Comparison Items | Laser cleaning | Chemical cleaning | Dry ice blasting | Ultrasonic cleaning |
Cleaning Way | Laser, Non-contact | Chemical Cleaning Agents, Contact | Dry ice, Non-contact Touch | Cleaner, Contact |
The Artifact Damage | No Damage | Damage | No Damage | No Damage |
Cleaning Efficiency | High | Low | Middle | Middle |
Consumable | Only Need Electricity | Chemical Cleaning Solution | Dry Ice | Special Cleaning Fluid |
Cleaning Effect | Very Good, High Cleanliness | In General, Uneven | Excellent, Not Even | Excellent,Clean Range Small |
Precision Cleaning | Accurate Control and High precision | Uncontrolled, Accuracy is Poor | Uncontrolled, Accuracy is poor | Not Specified Range to Clean |
Safety Environmental Protection | Pollution-free | Chemical Pollution of the Environment | No pollution | No pollution |
Manual Operation | The operation is simple, hand-held or be automation | Complex process flow, high requirements for operators, should do
measures to prevention pollution | The operation is simple, hand-held or automation | The operation is simple, but need to add manually consumables |
Input Costs | The first time high input without consumables maintenance costs low | The first time low input material cost is extremely high | The first time medium input and material cost is high | The first time low input, medium consu-mable cost |
