Non Contact Fiber Laser Marking Machine Permanent High Engraving
Precision
Product Performance Parameters
Model | KR-FL-SC20 | KR-FL-SC30 |
Laser Power | 20W | 30W |
Laser Wavelength | 1064nm | 1064nm |
Beam Quality | M2<1.6 | M2<1.6 |
Repetition FREQ. | 20-80KHz | 20-80KHz |
Marking Field | 110mmx110mm | 110mmx110mm |
Marking Depth | ≤1.2mm | ≤1.2mm |
Marking Line Speed | ≤14000mm/s | ≤14000mm/s |
Min. Line Width | 10um | 10um |
Min. Character | 0.15mm | 0.15mm |
Repetition Precision | ±0.005mm | ±0.005mm |
Power Consumption | ≤600w | ≤800w |
Maintenance-free Time | 100,000 hours | 100,000 hours |
Input Power | Single Phase 110V/220V/50-60Hz |
Cooling Method | Air Cooling | Air Cooling |
Fiber Laser marking machine can be used to process many kinds of
metal and nonmetal materials, especially for high hardness, high
melting point and brittle materials. It belong to no contact
processing, no damage to the product, no tool wear and marking
quality is good.The laser beam is in high density and the
processing material consumption is very small, and the processing
heat affected zone is small.High efficiency cause using computer
control, easy to realize automation.
Main Features
1). Non- contact marking: Laser marking is processed to non-
mechanical "knife", can mark on the printing surface of any regular
or irregular, and mark the workpiece without exerting stress,which
ensure the accuracy of the workpiece. No corrosion on the work
surface, no "tool" wear, no poison, no pollution.
2). Permanent: The markings don't subside with the environmental
factors such as touch, acid and reducing gases, high temperature,
low temperature, etc.
3). High engraving precision: laser marking machine engrave items
with fine lines, minimum line width is up to 0.04mm. The markings
are clear, durable and beautiful. Laser marking can meet the needs
of printing large quantities of data on minimal plastic parts. For
example, we can print two-dimensional barcode with higher precision
and higher definition, and have stronger market competitiveness
compared with the way of stamping .
4). The running cost is low: the marking speed is fast and the mark
is formed fast, and the energy consumption is small, so the running
cost is low. Although the laser marking machine has more equipment
investment than the traditional marking equipment at the begining,
it is much lower running cost and longer lifetime from a long term.
5). High Efficiency: The laser beam is controlled by the computer
and can move at high speed (5~7 meters per second), the marking
process can be completed in a few seconds.
6). Anti-fake:Applying laser marking technology, the mark carved is
not easy to be imitated and changed, to a certain extent, has a
good anti-fake effect.