3tech corporate limited |
|
SPU-200 B1 photovoltaic distribution unit
Introduction
Features
- Wide operating DC input range
Scenarios
- Solar hybrid solution
Specification
Product Type | SPU-200 B1 | |
System | Dimension (W×D×H) | 483 mm × 385 mm × 88 mm |
Weight | 20 kg | |
Installation Mode | In a 19-inch rack | |
Cabling Mode | From the top, right & left | |
Maintenance Mode | From the front | |
Input | Solar Input | 100 Vdc - 430 Vdc, Max. 15Ax4 |
Output | Voltage | -42 Vdc to -58 Vdc (typical: -48 Vdc ) |
Capacity | Max. 200A | |
Output Distribution | MCB | 1x300A |
Surge Termind | CAN+,CAN- | CAN communication |
BUS+,BUS- | System bus+/bus- | |
LVD+,LVD- | LVD contactor drive signal | |
LVD STATE | LVD contactor auxiliary contact status.(default:NO) | |
Environment | Operating Temperature | -40 ºC to +65 ºC (load needs derating to 80% at +45 ºC to +65
ºC, system can start at -40 ºC to -33 ºC without damage) |
Storage Temperature | -40 ºC to +70ºC | |
Operating Relative Humidity | 5% to 95% (no condensation) | |
Altitude | 0 to 2000 m (1 ºC per 200 m temperature derating from 2000 to 4000
m) |