Active Member
|
[China]
Address: NO. 1701, Bainaohui Technology Building, Wuxi, Jiangsu, China
Contact name:sales
WUXI OUCO INTERNATIONAL GROUP CO., LTD |
|
|
PLC Control Disposable Face Mask Manufacturing Machine Low Failure Rate
Characteristics
1. Three layers of fabric are automatically aligned and feed, and
weilding sys use ultrasonic waves are continuously pressed.
2. The production line adopts the structure of 2ply, with high
production efficiency
3. Nose clips and ear loop are automatically cut and welded by
ultrasound
4. Automatic counting and palletizing after welding earbands
Details
Overall size(mm) | 6800*3800*1900 |
Ply: | 3 Ply Mask |
Mask size(mm): | 95*175 |
Materials: | Spunbond Nonwoven+Meltblown Nonwoven+Spunbond Nonwoven |
Capacity(pieces/min): | 90-110 (140,000pcs/day) |
Compressed air(Mpa): | 0.4-0.7 |
Power(Kva): | 10 |
Operator: | 1person |
Advantages and characteristics of the production line
1. Small size, small footprint, aluminum alloy structure, beautiful, strong and rust-free
2. High stability, low failure rate and good accuracy.
3. Computer PLC programming control, servo drive, high degree of automation.
4. Photoelectric (optical fiber) testing raw materials, avoid mistakes
5. The camera is a dual-machine mask, compared with the single-machine mask machine, high efficiency, with automatic packaging line, greatly save manpower and material resources.
Plant installation requirements
1. Ground load bearing: less than or equal to 500KGS/ m2.
2. Working power :220V+/ -5%, 50Hz, rated power about 15KW(including packaging machine)
3. Operating environment: temperature 10-35 degrees, humidity 3-35%HR, no flammable corrosive gas, no dust, sterile workshop.
4. Compressed air: 0.5-0.7mpa, using flow rate 300L/ min
Main technical parameters
| Overall dimension | Length: 6500mm Width: 3500mm Height: 1950mm |
| Operating height | Ground to work table height: 850mm (adjustable) |
| Voltage | AC 220V, 50HZ, 6000W |
| Working air pressure | 0.5~0.7Mpa, dry gas source Φ12mm |
| Air consumption | 250 L/min |
| Vacuum | Equipped with vacuum pump, can be connected to customer vacuum source <-75kpa, 250L/min |
| Condition requirement | Clean room Class 10 or less |
Professional design team
All machine parts we have designed by the solidworks, and designed automatic, only need one person operate the machine. Which help the manufacturer save the cost.
Professional manufacture team
We have the profession team for the machine fabricating and assembling. also all materials choose the GB stand aluminum plate and SS 304 steel. All electronic elelments choose the international brand.
Test work for all machine
Before delivery, we will make all prodution test for the whole machine, which to make sure no problem when customer get the machine.
FAQ
Q1: When Hosng Pack was founded ?
A: It started in 2007, till now it around 13 years experience in Packaging Industry.
Q2: How about your delivery time?
A: Commonly it needs 30 days for production, but if there is anything urgent, can be finished within 15 days if spare parts in stock.
Q3: What’s the warranty?
A: Warranty is 1 year, not including easy damaged spare parts, such as heater, belts, etc.
Q4: Can arrange technician to oversea for commissioning ?
A: Yes, we can if you need, but you need to pay the fees including: Visa charges, return ticket, accommodation and labor fees. We also accept you arrange technician to learn in our factory before shipping.
