Lightweight Anti Fog Protective Safety Goggles For Splash Protection

Protective Safety Goggles

Features

1. High protection level

2. Good visibility

3. Comfort to wear

4. Special for ergonomics, harmlessness, comforts, airing and flexibility

5. Protects you from particles, dust, or spray.

6. The lenses are clear allowing a maximum visible light transmission.

Labor protection articles selection rules, according to the abrasion category, the degree of loss, the PPE to evaluate their materials use period, ordinary of the foreign body splash goggles, standard is 24 months, if used frequently should be 3 months in a vice, improper use or other goggles use time is too long, rough lenses and damage, after leaving scratches affect the wearer's line of sight, for chemical splash workplace after use, can not meet the safety standards such as cases need to be replaced in a timely manner.

1. Put the goggles together and disinfect them.

2. Soak in chlorine-containing disinfectant with effective chlorine 1000mg-2000mg/L for 30-60 minutes to disinfect.

3. Then rinse with running water and wipe with 75% medical alcohol.

4. Finally, according to the instruction, high temperature drying cabinet can be selected for thermal drying, and hospitals with conditions can also conduct mechanical thermal disinfection or low temperature sterilization.

1. Wearing method: wear goggles with both hands to adjust the comfort level.

2. Removal method: take it off by pinching the side near the head or ear and put it in a container for recycling or clinical waste.

Precautions:

1. Before wearing, check whether there is any damage and whether the wearing device is loose;

2. Once contaminated by the patient's body fluids or blood, it should be cleaned and disinfected immediately.

3. Clean and disinfect after each use