This in stock automatic mask machine is mainly used for automatic
forming of disposable flat masks. The servo and constant
temperature control system used is controlled by PLC program to
make the material from compounding → forming → welding → punching →
spot welding ear bands completed at one time, and the entire
production process is fully automated. Product features of the mask
machine The mask making machine is a process of manufacturing a
variety of masks with constant filtration performance through
processes such as hot-pressed folding molding, ultrasonic welding,
scrap removal, and welding of earband nose bridge strips. The
production speed of masks is 40-50 pieces / min and above, and the
pass rate is above 98%, which is higher than the similar products.
1. mask machines are used for full-automatic folding mask
production (typical models like N95 mask).
2. The working process of N95 Mask Machines are as follows: The
multi-layer non-woven fabric rolls are subjected to compound
roll welding after feeding. Nasal lines are welded after unrolling
and cutting. Two rolls of rubber band are welded afte
automatically unrolling and cutting to designated length. Then
masks are folded in half. After ultrasonic welding and fusion, the
masks are rolling-cut and formed. Finally, we get finished N95
masks.
3. The masks have great filtration effect, perfectly fit face of
people and are comfortable to wear without
causing any pressure . The masks can be applied to various fields,
like medical, electronics, mining, construction, etc.
4. Mask Machine uses PLC, touch screen control and the main
conveyor adopts unidirectional motor transmission, which can
achieve precise movement, stable control and adjustable speed
Specification
Raw Material | Non-woven Outside | Non-woven Inside | Filter Layer | Nose Brdige |
Out Dia (mm) | Max600 | Max600 | Max600 | Max400 |
Inner Dia (mm) | Φ76.2 | Φ76.2 | Φ76.2 | Φ76.2 |
Width (mm) | 230-300±2 | 230-300±2 | 230-300±2 | 3-5±0.2 |
Thickness (mm) | NA | NA | NA | 0.5-1.0±0.1 |
Weight (kg) | Max20 | Max20 | Max20 | 30 |
Machine Type | ONL-MASK 2 02 N95 |
Production Speed | 40-50PCS/MIN |
Voltage | 220V 50Hz |
Compressed Air | 0.5-0.7Mpa |
Power | 15 KW |
Dimension | L9657*W1472*H1965mm |
Weight | ≤6000kg |
Ground Boad | ≤500KG / ㎡ |
Operating Environment | temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable, corrosive
gas, no dust (cleanliness no less than 100,000) |