Standard light against color light box P60+(6)(Six light source upgrade)

advantages:

1. Display the service time and total time of each light source.

2. Automatic switching of light source, with functions of same color and different spectrum.

3, no preheating, no flash, can ensure fast and reliable evaluation of color.

4, small energy consumption, no heat (no heat dissipation), high luminous efficiency.

5. It is equipped with more complete common light sources of British and American standards.

6. The name of light source can be changed to make it more convenient to add light source.

Application

Applicable industry: widely used in textile, toys, printing and dyeing, plastic, paint, ink, printing, pigment, chemical, ceramics, shoes, leather, hardware, food, cosmetics and other multi-industry color management collar.

Actual shooting of light source effect:F,D65,TL84,UV,CWF,TL83/U30.

OI (operating instructions)

1.Connect the random power cord to the light box, connect the other end of the plug to the power supply socket, and connect the power (220V50HZ).

2.First press the red button ON the left (master switch), then lightly press the ON/OFF button ON the panel of the color light box. The LCD LCD module (with backlight illumination) will display the power ON, and display the name of each light source and the cumulative use time.

3.Press F, D65, TL84, UV, CWF key can switch automatically, also can open a variety of light sources at the same time (press at the same time).In the case of a single light source, the display time is the name and use time of the corresponding light source; in the case of multi-light source startup, the name and use time of the started light source will be displayed in flow.The CLR key on the keypad is used for reset and zeroing, effective when a single light source is activated.

4.The tested product is placed in the middle of the bottom plate of the light box.Observe Angle with 90 degrees light source, 45 degrees line of sight is advisable.The proper Angle can be adjusted according to the switch of the item under test to achieve excellent detection effect.

5.Turn OFF the power ON/OFF button. The power should be turned off if it is not used for a long time.

6.When changing new lamp tube, all sorts of illuminant (tube) have corresponding position to install, cannot the position of lamp tube is reversed.After the replacement of the old lamp tube, the original service time shall be reset to start the timing again. Reset method: open the replaced lamp tube, insert the screwdriver into the circular hole in the CLR center, and press the key (the service time of other light tubes will not be reset).

Note: do not use the CLR key at will, in case the timing system time is reset by mistake.

7.The light box is equipped with a variety of standard light sources, all installed in the fixed position of the light box, the position can not be reversed.

8.The external power supply of the equipment must have a grounding device to ensure the safe use.

FAQ:

A1 We accept trade assurance,western union ,Visa master card and tt. Trade assurance
can protect you, when you confirm the product then the money into my account.

Q2 Do your product have warranty?

A2 Yes,all our products enjoy one year warranty protect.

Q3 When do you send the products? And how do you send it ?

A3 For the sample or small order, we will send out the goods with 5 days,If have stock ,we will send immediately. We send them by ups,fedex,tnt or dhl.For big order,normal is 20 days will finish.

Q4 Are you trading company or factory?

A4 We are factory,all selling products we make them by ourself.
Price will direly to the bottom and guaranty the quality.

Q5 Do you accept OEM or revised logo,color,model,size?

A5 Yes,we accept OEM for the qualify buyer.We can make the products according to customer personal requirement.