Home Companies Shenzhen ThreeNH Technology Co., Ltd.

Portable Handheld Spectrom 3nh Spectrometer Plastic Electronics Color Wireless 10nm

Shenzhen ThreeNH Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st Road, Shiyan, Baoan District, Shenzhen, China.

Contact name:Melorae

Inquir Now

Shenzhen ThreeNH Technology Co., Ltd.

Portable Handheld Spectrom 3nh Spectrometer Plastic Electronics Color Wireless 10nm

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

Introduction:

ST2020 is a new portable spectrocolorimeter with 3nh own core research and development technology.

It is easy to use and can be measured with one click. It uses a built-in large area silicon photodiode array sensor. It has excellent repeatability and inter-station difference, the measured data are steady, accurate and reliable.

 

TS2020 spectrocolorimeter is equipped with three apertures MAV:Φ8mm/Φ10mm(flat),SAV: Φ4mm/Φ5mm(flat) ,SSAV:1x3mm(tip), widely used for plastic electronics, paint ink, textile and garment printing, printing, ceramics and other industries color difference quality control. UV is included for the measurement of fluorescent samples.

 

Characteristics of the array spectrocolorimeter ST2020

 

1.Silicon photodiode array sensor

The larger array sensor, the stronger light will not be saturated, the lower light sensitivity is higher and the wider spectrum response range, has guaranteed the instrument measurement speed, the accuracy, the stability and the consistency, grasps the core technology, with the same platform of international standards, achieve perfect compatibility.

2.Adopt full waveband balanced LED light source

ST2020 spectrocolorimeter adopts 400 ~ 700nm full waveband balanced LED light source as the illumination light source, which has enough spectrum distribution in the visible light range and avoids the loss of the spectrum of white LED in the specific wave band.

3.Grating splitting technology

The use of plane grating spectroscopy technology, with a higher resolution, so that more accurate color measurement.

4.Intelligent base, automatic calibration

It is equipped with intelligent calibration base, can carry out automatic white board calibration, professional grade standard white board reflectivity R% ≥95% , good surface uniformity, high stability, can obtain repeated accurate data.

5.New fashion appearance design based on ergonomics

The hand-held position and the position of the measuring button are carefully designed to meet different holding habits, smooth and fine surface, derived from the professional appearance treatment technology.

6.Excellent interstation and repeatability

The repeatability ΔE * ab ≤0.028, the Inter-instrument Error ΔE * AB ≤0.28 data is stable and reliable, which ensures the consistency of the data measured by multiple devices, and can be used for color matching and accurate color transfer.

 

7.Color management software

The array spectrocolorimeter ST2020 is equipped with SQCX software, which is suitable for quality monitoring and color data management in various industries. The user's color management data, compare color differences, generate test reports, provide a variety of color space measurement data, customized customer color management.

 

ST2020 technical parameters of the spectrocolorimeter

 

Product nameST2020 spectrocolorimeter
Optical GeometryD/8(diffused illumination, 8-degree viewing angle)
Specular ComponentSCI Including the specular reflection of light
Meet The CriteriaCIE NO.15,GB/T 3978,GB 2893,GB/T 18833,ISO7724-1,ASTM E1164,DIN5033 Teil7
Repeatability*ΔE*ab≤0.028
Inter-instrument Error**ΔE*ab≤0.28
Displayed Accuracy0.01
Measuring/Illuminating Aperture***MAV:Φ8mm/Φ10mm(flat),SAV: Φ4mm/Φ5mm(flat) ,SSAV:1x3mm(tip)
Measurement IndicatorsSpectral reflectivity, CIE-Lab, CIE-LCh, HunteLab, CIE-Luv, XYZ, Yxy, RGB, chromatic aberration (ΔE * ab, ΔE * CMC, ΔE * 94, ΔE * 00) , whiteness (ASTM E313-00, ASTM E313-73, CIE/ISO, AATCC, Hunter, Taube Berger Stensby) , yellows (ASTM D1925, ASTM E313-00, ASTM E313-73) ,staining fastness, color-changing fastness, etc. (some of the indicators were achieved by PC)
IlluminantD65,A,C,D50,F2,F7,F11
Displayed DataSamples Chromaticity Values, Color Difference Values/Graph, PASS/FAIL Result, Color Simulation, Color Offset
Light SourceCombined full spectrum LED light source
Locating MethodStability film, visual
CalibrationIntelligent automatic calibration (Contact Type)
Observer Angle2°,10°
Integrating Sphere Size40mm
Spectrophotometric ModeFlat Grating
SensorsLarge-area silicon photodiode array ( double-row 20 group)
Wavelength Interval10nm
Wavelength Range400-700mm
Measured Reflectance Range0-200%
Reflectivity resolution0.01%
Measurement ModeSingle Measurement, Average Measurement(2-99times)
Measuring TimeAbout 1s
SizeL * W * H=114 X 70 X 208mm
WeightAbout 435g(Calibration block not included)
BatteryLi-ion battery, 8500 measurements within 8 hours
Illuminant Life Span10 years, more than 1.5 million times measurements
Display3.5-inch TFT color LCD, Capacitive Touch Screen
Data PortUSB
Data ShorageStandard 500 Pcs, Sample 10000 Pcs, Mass storage on PC side
Software SupportWindows
LanguageSimplified Chinese, English, Traditional Chinese
Operating Environment0~40℃, 0~85%RH (no condensing), Altitude < 2000m
Storage Environment-20~50℃, 0~85%RH (no condensing)
Standard AccessoryPower Adapter, USB Cable, User Guide, PC Software(Download from office website), White and Black Calibration Cavity, Protective Cover, Wrist strap, 8mm flat aperture, 4mm tip aperture
Optional AccessoryUSB Micro Printer, Powder Test Box
Notes:
* 30 standard deviations of the whiteboard were measured at a 5-second interval after whiteboard calibration;
** BCRA Series II 12-panel measurement average;
*** The illumination aperture is the actual aperture size of the instrument;
If there are any changes to the above parameters, without prior notice.

 

 

 
 

3nh Customer Centre
Contact: Jenny Huang (sales manager)
Office Address : F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st Road, Shiyan, Baoan District, Shenzhen, China.
Factory Address : 4/F, Building 8, Nangang Second Industry Zone, No. 1026, Songbai Road, Xili, Nanshan Dist., Shenzhen, Guangdong,
WhatsApp/wechat/phone: 86-18165740359
Fax : 86-755-2719-0609
Skype : huang.zhen9
WeChat : 86-18165740359
Email : sales0021@3nh.com

Hot Products

NS810 NS800 Powder Paste Liquid Spectrophotometer Accessories Universal Test Components If your ...
UTC Liquid Powder Spectrophotometer Accessory for TS series This accessory universal test components ...
Introduction: ST10 is a new portable spectrocolorimeter with 3nh own core research and development ...
Introduction: ST1818 is a new portable spectrocolorimeter with 3nh own core research and development ...
Introduction: ST2020 is a new portable spectrocolorimeter with 3nh own core research and development ...
3nh Accessory Liquid Powder Paste Universal Test Components for NS series spectrophotometer If your ...