Active Member
|
[China]
Address: F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st Road, Shiyan, Baoan District, Shenzhen, China.
Contact name:Melorae
Shenzhen ThreeNH Technology Co., Ltd. |
|
|
45/0 NS808 Traffic Road Signs Brightness Measurement Spectrophotometer with Yxy Color Space
Brief Introduction:
NS808 Yxy Spectrophotometer is special designed for the color measurement of traffic signs. It was researched and developed solely by 3nh independently who owns the complete independent intellectual property rights. Its leading position in the industry is earned by its powerful functions, high accuracy and reliability. NS808 spectrophotometer can be easily used to measure the brightness factor and chromaticity coordinate of all kinds of traffic signal reflection film. Built-in GB2893 safety color and GB/T18833 all kinds of standard color module of traffic signal reflection films, we can choose one according to the requirement. In addition, we can also conveniently customize polygon tolerance they want.
NS808 can make precise measurements in multiple color spaces to multiple color indexes like reflectance spectrum. With the help of this instrument, the study of color matching and color management can be precisely implemented, and also product quality control can be easily done. It's also configured with advanced PC software, connected with PC, more extension functions will come in hand.
With the software SQCT, it is easy for customers to meausre the brightness index if they are in thesafety color or not. Without this software, they can't do good job.
SQCT color management control system is specialized for NS808 Traffic Signs Measurement Spectrophotometer. This software is high-tech software integrating colorimetry, modern optoelectronics and computer science. It not only provides professional normalization, standardization and data color management solution for modern enterprises, but provides a dedicated mode for Traffic Signs Measurement.
SQCT software is connected to the spectrophotometer with USB cable. You can operate it through PC. It not only retains the existing functions of the spectrophotometer, but also extends its functions. SQCT software can measure the color, export the report, input the standard, import the standard from sample, set the tolerance, color space & formula, light source etc, calibrate the white and black board, write the white board data, upload the data and so on. It’s a right-hand man of color quality management.
Specification:
| Product Model | NS808 Yxy Portable Spectrophotometer |
| Illuminating/Viewing Method | 45°/0 (45° ring illuminating, 0° viewing) Conform to standard CIE No. 15, GB/T3978, GB2893, GB/T18833 |
| Integrating Sphere Size | Φ58mm |
| Measuring Aperture | Φ8mm |
| Observer | 2°/10° |
| Repetitive Error | Spectral Reflectance: standard deviation within 0.1%(400~700nm:
within 0.2%) Colorimetric Value: standard deviation ΔE*ab≤0.04 (Measurement Conditions: white calibration plate measured 30 times at 5 seconds intervals after white calibration performed.) |
| Inter-Instrument Error | ΔE*ab≤0.2 (Average value of measuring the 12 tint plates of BCRA series II) |
| Wavelength Range | 400∽700nm |
| Wavelength Pitch | 10nm |
| Reflectance Range | 0∽200% |
| Light Source Type | D65, D50, A, C, D55, D75, F2, F6, F7, F8, F10, F11, F12 |
| Light Source Device | Combined LED Light |
| Light Source Life | 5 years, more than 1.6 million measurements |
| Sensor | Silicon Photoelectric Diode Array |
| Color Space | CIE LAB, XYZ, Yxy, LCh, CIE LUV |
| Color Difference Formula | ΔE*ab, ΔE*uv, ΔE*94, ΔE*cmc(2:1), ΔE*cmc(1:1), ΔE*00 |
| Display Data | Spectral Graph/Data, Sample Chromatic Value, Color Difference Value/Graph, PASS/FAIL Result, Color Offset, Color Simulation |
| Other Chromaticity Data | WI(ASTM E313, CIE/ISO, AATCC, Hunter), YI(ASTM D1925, ASTM 313), TI(ASTM E313, CIE/ISO), Metamerism Index (Mt), Color Strength, Color Stain, Color Fastness |
| Measuring Time | 1.5s |
| Data Storage | 1000 standards, 10000 samples |
| Data Port | USD&RS232 |
| Dimension | 90*77*230mm |
| Weight | 600g |
| Battery | Li-ion Battery, 5000 measurements in 8 hours. |
| Operation Temperature | 0∽40℃(32∽104℉) |
| Storage Temperature | -20∽50℃(-4∽122℉) |
| Standard Accessory | Power Adapter, Li-ion Battery, Operating Instruction, CD-ROM (containing management software), Data Line, White and Black Calibration Cavity, Protective Cover and Wrist Strap. |
| Optional Accessory | Universal Test Components, Micro Printer, Powder Test Box |
