Hospitals and medical professionals work around the clock to save
lives and mitigate the devastating effects of disease. But
providing treatment to patients is just the tip of the iceberg.
Viruses and bacteria can have complex effects on patient recovery.
Keeping the air free of viruses and bacteria is critical to
providing quality care and improving treatment outcomes.
Upper air disinfection system
Hospital waiting rooms and recovery rooms (and sometimes school
classrooms) can be routinely air sanitized using an overhead air
sanitization system. These systems are usually installed at a
height of 2.5 meters and use the natural convection of air to
function. Disinfection occurs as the air flows through the system,
typically reducing viruses by 70-80%. Typical lamp power can be up
to 75 watts.
Open UV Lamps
Another option is an open-frame UV light fixture, which shines the
light directly downward. Since there is no shielding, there should
be no people in the room when the system is in use.
Air Conditioning System
In air conditioning systems, high output (HO) UV lamps can prevent
biofouling on fan coil units. When combined with photocatalytic
oxidation technology, it also removes volatile organic compounds
(VOCs) such as odors. Depending on your needs, use up to 150 watts
in commercial applications and up to 25 watts in residential
applications.
other apps
Air disinfection can play an important role in various applications
such as hospitals, schools, offices, industry, (food) malls and
museums." "With the promotion of emerging UV coatings, inks and
other photopolymer materials and ultraviolet radiation light
sources, the use of ultraviolet high-pressure mercury lamps in
printing and coating industries has become more and more
widespread, but because the operators do not know much about this
technology, use There have also been many problems in China. As a
manufacturer of UV light sources, we will inform you of the
precautions as follows:
1. The ultraviolet lamp tube must be matched with the same matched
ballast, magnetic leakage transformer and capacitor before it can
be used.
2. It must be installed in accordance with the wiring diagram
provided by the manufacturer.
3. The light box in which the lamp is installed must be equipped
with a good air cooling system to ensure the heat dissipation of
the lamp and prevent the substrate from being thermally deformed.
4. Before the tube is put on the machine, it is necessary to wipe
off the fingerprints and oil stains on the outer wall of the lamp
with gauze and alcohol, otherwise it will cause the lamp to lose
transparency after ignition. If the UV curing material has a higher
content of volatile solvents or work The environment is polluted by
dust. Please wipe the lamp with alcohol every other week to ensure
that the lamp does not devitrify prematurely.
5. During the whole use process, keep good contact between the lamp
cap and the contact point of the lamp, otherwise it will cause
serious oxidation of the lamp cap and cause the lamp tube seal to
burst.
6. The UV lamp can only be started when it is cooled down. ; When
restarting, you need to wait for the UV lamp to completely cool
down before starting. After 5 minutes; the more frequent the
switch, the shorter the lamp life.
7. The average lifespan of the high-pressure mercury lamp of Ningbo
UV Light & Electricity is 8000-1000 hours, and the surface
temperature of the lamp tube is 600~700℃ during normal operation.
Mainly related to the number of lamp starts.
8. It is strictly forbidden for the lamp and transformer to work in
an overloaded state to avoid lamp explosion or transformer burn-out
accidents. The power supply voltage should not fluctuate too much.
If it drops suddenly by more than 5%, it may go out by itself.
Anything that caused the lamp to burst due to the burning of the
lamp cap is not the internal quality of the lamp, and it is purely
improper use and will not be returned.
9. The transformer must have good natural ventilation conditions
for heat dissipation.
" "Application range:
1. Large-scale domestic sewage treatment, disinfection and
sterilization of industrial sewage treatment, industrial drinking
water, residential water supply, high-purity water.
2. Overflow sterilization of water in food industry.
3. Aquaculture, large-scale high-density aquaculture plant water
supply end sterilization.
4. Underwater advanced oxidation AOT, underwater sterilization and
disinfection equipment."
Straight Amalgam UVC LAMPS |
Model no | | | wattage(W) | current(mA) | voltage(v) | life span (h) | UVC LIGHT intensity 100cm distance (μw/cm2) |
diamemter mm | length mm | Ozone |
A55S15H | 15 | 1146 | yes/no | 55 | 400 | 180 | 13000 | 170 |
A75S15H | 15 | 1554 | yes/no | 75 | 400 | 200 | 13000 | 260 |
A80S15H | 15 | 846 | yes/no | 80 | 800 | 120 | 13000 | 240 |
A120S15H | 15 | 1149 | yes/no | 120 | 800 | 170 | 13000 | 330 |
A150S15H | 15 | 1554 | yes/no | 150 | 800 | 2320 | 13000 | 400 |
A250S15H | 15 | 1554 | yes/no | 250 | 1200 | 190 | 13000 | 650 |
A320S15H | 15 | 1554 | yes/no | 320 | 1200 | 180 | 13000 | 800 |