Results for20mm banded pistonfrom 1454 Products.
|
Elongation @ break 356% Banded Piston of shock absorber OD 30mm With leakage Oil Holes Specifications: Physical performance for shock piston tensile strength More than 15MPa ...
|
|
|
|
Low Friction PTFE Banded Shock Absorber Piston With Good Seal For Front Car Shocks Specifications: banded piston OD 29.84-29.91 single lip OD 30.13-30.33 skirt height 9.5-10.3 ...
|
|
|
|
25mm PTFE banded shock piston with HRB70 - 90, density > 6.5g/cm3 with ID 7.1mm Piston export to Europe market with good quality pistons are produced by automatic banding machine ...
|
|
|
|
High temperature resistance, two holes design D31 cars Shock Absorber Piston Banded piston can do slide resistance test according to the customer's demand. piston should slide down ...
|
|
|
|
High Temperature Resist density 6.5 g with 6 oil holes 27 mm Car Shock Absorber Piston Banded piston can do slide resistance test according to the customer's demand. piston should ...
|
|
|
|
Product Description: Banded Piston is a uniquely designed shock absorber piston, made from sintered material for superior durability and corrosion resistance. Its round shape ...
|
|
|
|
PTFE bands with various filler assembled on OD of sinter piston Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate ...
|
|
|
|
Black Density 2.16g / cm3 PTFE Bands with various filler assembled on piston outside Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) ...
|
|
|
|
Elongation @ break > 100% filled PTFE bands fitted on OD of sinter piston in shocks Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) ...
|
|
|
|
Different Filler PTFE Bands With Good Seal And Tensile Strength For Sinter Pistons Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa ...
|
|
|
|
32mm PTFE banded Shock Piston with various PTFE fillers for car / motorbike shocks Specifications: • 4 round and square holes • conventional shock piston • net weight is 35.29g • ...
|
|
|
|
27mm PTFE banded Shock absorber Piston with advanced fillers for car / motorbike shocks Specifications: • 4 round and square holes • conventional shock piston • net weight is 25...
|
|
|
|
45mm PTFE banded Shock absorber Piston with friction coefficient 0.18 for rear shocks Specifications: • many round oil holes design • conventional shock piston • net weight is 45...
|
|
|
|
Inclined Hole Design Shock Absorber Piston Banding Material Shore Hardness 57-67 Four pairs of inclined hole design shock absorber piston Steam treatment for the sinter parts ...
|
|
|
|
F50 - U3 - 66 customized car shock Banded Piston with flared design density 6.5 g / cm3 Product Name: Sintered shock absorber piston Material: (MPIF 35) FC-0205 (DIN 30910-4) Sint ...
|
|
|
|
Good seal steam treatment D27 TFM banding Shock Piston with Hoganas powder Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break ...
|
|
|
|
Increased seal Customized ring D20 cars Shock Absorber Piston with PTFE banding Specifications: Physical performance for shock pistons tensile strength More than 15MPa elongation @ ...
|
|
|
|
Suspension Used Made by Fe C Cu Powder Metallurgy Sintered Parts Piston With PTFE Banding Specifications: Physical performance for shock pistons tensile strength More than 15MPa ...
|
|
|
|
PTFE banded 3 holes design KIA, FORD, LAND ROVER D35 Shock Absorber Piston Specifications: Physical performance for shock piston tensile strength More than 15MPa elongation @ break ...
|
|
|
|
Blow off testing result good 36mm Shock Piston with PTFE banded with density 2.14 Our company produce shock absorber pistons with variety types and sizes. These shock absorber ...
|
|
|